GAZETTE NOTICE NO. 342

PURSUANT to section 9 (1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the schedule hereto to be Kenya Standards with effect from the date of publication of this notice. Number Title of Specification or Code of Practice Chemical KS ISO 216:2007 Kenya Standard — Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction, First Edition KS ISO 534:2011 Kenya Standard — Paper and board — Determination of thickness, density and specific volume, First Edition KS ISO 535:2014 Kenya Standard — Paper and board — Determination of water absorptiveness — Cobb method, First Edition KS ISO 1762:2019 Kenya Standard — Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C, Second Edition KS ISO 1974:2012 Kenya Standard — Paper — Determination of tearing resistance — Elmendorf method, First Edition KS ISO 2144:2019 Kenya Standard — Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 900 °C, First Edition KS ISO 2470-1:2016 Kenya Standard — Paper, board and pulps — Measurement of diffuse blue reflectance factor • Part 1: Indoor daylight conditions (ISO brightness), Second Edition KS ISO 2471:2008 Kenya Standard — Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method, First Edition KS ISO 2758:2014 Kenya Standard — Paper — Determination of bursting strength, Third Edition KS ISO 2759:2014 Kenya Standard — Board — Determination of bursting strength, First Edition KS ISO 5626:1993 Kenya Standard — Paper — Determination of folding endurance, First Edition KS ISO 6588-1:2012 Kenya Standard — Paper, board and pulps — Determination of pH of aqueous extracts Part 1: Cold extraction, First Edition KS ISO 6588-2:2012 Kenya Standard -- Paper, board and pulps — Determination of pH of aqueous extracts Part 2: Hot extraction, First Edition KS ISO 8791-1:1986 Kenya Standard — Paper and board — Determinatiorr of roughness/smoothness (air leak methods) Part 1: General method, First Edition KS ISO 8791-2:2013 Kenya Standard — Paper and board — Determination of roughness/smoothness (air leak methods) Part 2: Bendtsen method, First Edition KS ISO 8791-3:2017 Kenya Standard — Paper and board — Determination of roughness/smoothness (air leak methods) Part 3: Sheffield method, First Edition KS ISO 16532-1:2008 Kenya Standard — Paper and board Determination of grease resistance Part 1: Permeability test, First Edition KS ISO 16532-2:2007 Kenya Standard — Paper and board Determination of grease resistance Part 2: Surface repellency test, First Edition KS ISO 16532-3:2010 Kenya Standard — Paper and board — Determination of grease resistance Part 3: Turpentine test for voids in glassine and greaseproof papers, First Edition KS ISO/TR 10688:2015 Kenya Standard — Paper, board and pulps — Basic terms and equations for optical properties, First Edition KS 376-1:2005 Cor 1:2020 Kenya Standard — Flexible polyurethane (polyether) foams — Specification Part 1: Matresses TECHNICAL CORRIGENDUM 1, First Edition Electrotechnical KS ISO 17261:2012 Kenya Standard — Intelligent transport systems — Automatic vehicle and equipment identification — Intermodal goods transport architecture and terminology, First Edition KS ISO 17262:2012 Kenya Standard — Intelligent transport systems — Automatic vehicle and equipment identification — Numbering and data structure, First Edition KS ISO 17263:2012 Kenya Standard — Intelligent transport systems — Automatic vehicle and equipment identification — System parameter, First Edition KS ISO 17264:2009 Kenya Standard — Intelligent transport systems — Automatic vehicle and equipment identification — Interfaces, First Edition KS ISO 24534-2:2010 Kenya Standard — Automatic vehicle and equipment identification -- Electronic registration identification (ERI) for vehicles Part 2: Operational requirements, First Edition KS ISO 24534-3:2016 Kenya Standard — Kenya Standard — Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles Part 3: Vehicle data, First Edition 17th January, 2020 THE KENYA GAZETTE 129 KS ISO 24534-4:2010 Kenya Standard — Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles Part 4: Secure communications using asymmetrical techniques, First Edition KS ISO 24534-5:2011 Kenya Standard — Automatic vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles Part 5: Secure communications using symmetrical techniques, First Edition KS ISO 24535:2007 Kenya Standard — Intelligent transport systems — Automatic vehicle identification — Basic electronic registration identification (Basic ERI), First Edition KS ISO/TR 24098:2007 Kenya Standard — Intelligent transport systems — System architecture, taxonomy and terminology — Procedures for developing ITS deployment plans utilizing ITS system architecture, First Edition KS ISO/TS 17574:2017 Kenya Standard — Electronic fee collection — Guidelines for security protection profiles, First Edition KS ISO 17575-1:2016 Kenya Standard — Electronic fee collection — Application interface definition for autonomous systems Part 1: Charging, First Edition KS ISO 17575-2:2016 Kenya Standard — Electronic fee collection — Application interface definition for autonomous systems Part 2: Communication and connection to the lower layers, First Edition KS ISO 17575-3:2016 Kenya Standard --Electronic fee collection — Application interface definition for autonomous systems Part 3: Context data, First Edition KS ISO 24014-1:2015 Kenya Standard — Public transport — Interoperable fare management system Part Architecture, First Edition KS ISO/TR 24014-2:2013 Kenya Standard — Public transport — Interoperable fare management system Part 2: Business practices, First Edition KS ISO/TR 24014-3:2013 Kenya Standard — Public transport — Interoperable fare management system Part 3: Complementary concepts to Part 1 for multi- application media, First Edition KS ISO/TR 17185-2:2015 Kenya Standard — Public transport user information Part 2: Public transport data and interface standards catalogue and cross references, First Edition KS ISO/TR 17185-3:2015 Kenya Standard — Intelligent transport systems — Public transport user information Part 3: Use cases for journey planning systems and their interoperation, First Edition Food KS EAS 98:2019 Kenya Standard — Curry powder Specification, First Edition KS EAS 99:2019 Kenya _Standard — Spices and condiments — Terminology, First Edition KS EAS 147-1:2019 Kenya Standard — Vinegar from natural sources — Specification, First Edition KS EAS 147-2:2019 Kenya Standard — Vinegar from artificial sources — Specification, First Edition KS EAS 916:2019 Kenya Standard — Ginger — Specification, First Edition KS EAS 917:2019 Kenya Standard — Turmeric — Specification, First Edition KS EAS 918:2019 Kenya Standard — Cloves — Specification, First Edition KS EAS 919:2019 Kenya Standard — Pilau masala — Specification, First Edition .AS 920:2019 Kenya Standard — Tea masala — Specification, First Edition KS 2890:2020 Kenya Standard — Food fortification premix — Specification, First Edition Ag,.kaiture KS ISO 20613:2019 Kenya Standard — Sensory analysis — General guidance for the application of sensory analysis in quality control, First Edition KS ISO 16820:2019 Kenya Standard — Sensory analysis — Methodology — Sequential analysis, Second Edition KS ISO 17059:2019 Kenya Standard — Oilseeds Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method), First Edition KS ISO 20377:2018 Kenya Standard — Dried parsley (Petroselinum crispum) — Specification, First Edition Engineering KS 2846:2020 Kenya Standard — Mixing water for concrete — Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete, First Edition KS 2766:2020 Kenya Standard — Wastewater treatment — Vocabulary, First Edition KS 2767-1:2020 Kenya Standard — Wastewater treatment plants Part 1: General Construction principles, First Edition KS 2767-3:2020 Kenya Standard — Wastewater treatment plants Part 3: Preliminary treatment, First Edition KS 2767-4:2020 Kenya Standard — Wastewater treatment plants Part 4: Primary settlement, First Edition KS 2767-6:2020 Kenya Standard — Wastewater treatment plants Part 6: Activated sludge process, First Edition KS 2767-7:2020 Kenya Standard — Wastewater treatment plants Part 7: Biological fixed-film reactors, First Edition KS 2767-9:2020 Kenya Standard — Wastewater treatment plants Part 9: Odour control and ventilation, First Edition KS 2767-10:2020 Kenya Standard —Wastewater treatment plants Part 10: Safety principles, First Edition KS 2835:2020 Kenya Standard — Concrete paving flags — Requirements and test method, First Edition KS ISO 10524-1:2018 Kenya Standard — Pressure regulator for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices, First Edition KS ISO 10524-2:2018 Kenya Standard — Pressure regulators for use with medical gases Part 2: Manifold and line pressure regulators, First Edition KS ISO 10524-3:2019 Kenya Standard — Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves (VIPRs), First Edition KS ISO/TR 10524-4:2008 Kenya Standard — Pressure regulators for use with medical gases Part 4: Low pressure regulators, First Edition Leather and Textile KS ISO 9949-2:1993 Kenya Standard — Urine absorbing aids — Vocabulary Part 2: Products, First Edition KS ISO 9949-3:1993 Kenya Standard — Urine absorbing aid — Vocabulary Part 3: Identification of product types, First Edition KS ISO 15621:2017 KS ISO 16021:2000 Chemical KS ISO 2884-2:2003 KS ISO 9117-3:2010 KS ISO 6504-3:2006 KS ISO 3856-1:1984 Kenya Standard — Absorbent incontinence aids for urine and/or faeces — General guidelines on evaluation, First Edition Kenya Standard — Urine-absorbing aids — Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers, First Edition Kenya StAndard — Determination of viscometer Kenya Standard — Determination of viscometer Paints and varnishes — viscosity using rotary Paints and varnishes — viscosity using rotary Kenya Standard — Paints and varnishes — Determination of hiding power Part 3: Determination of contrast ratio of light coloured paints at a fixed spreading rate Kenya Standard — Paints and varnishes — Determination of "soluble" metal content Part 1: Determination of lead content — Flame atomic absorption spectrometric method and dithizone spectrophotometric method KS ISO/IEC 9797-3:2011 Kenya Standard — Information technology — Security techniques — Message Authentication Codes (MACs) Part 1: Mechanisms using a block cipher KS ISO/IEC 13888-1:2009 Kenya Standard — Information technology — Security techniques — Non- repudiation Part 1: General KS ISO/IEC 13888-2:2010 Kenya Standard — Information technology — Security techniques — Non- repudiation Part 2: Mechanisms using symmetric techniques KS ISO/IEC 13888-3:2009 Kenya Standard — Information technology — Security techniques — Non- repudiation Part 3: Mechanisms using asymmetric techniques KS ISO/IEC 9798-1:2010 Kenya Standard — Information technology — Security techniques — Entity authentication Part 1: General KS ISO/IEC 9798-2:2008 Kenya Standard — Information technology — Security techniques — Entity authentication Part 2: Mechanisms using symmetric encipherment algorithms KS ISO/IEC 9798-4:1999 Kenya Standard — Information technology —"Security techniques — Entity authentication Part 4: Mechanisms using a cryptographic check function The following standards are confirmed: Electrotechnical KS ISO/IEC 19794-2:2011 Kenya Standard — Information technology — Biometric data interchange formats Part 2: Finger minutiae data KS ISO/IEC 19794-4:2011 Kenya Standard — Information technology — Biometric data interchange formats Part 4: Finger image data KS ISO/IEC 19794-5:2011 Kenya Standard — Information technology — Biometric data interchange formats Part 5: Face image data KS ISO/IEC 19794-6:2011 Kenya Standard — Information technology — Biometric data interchange formats Part 6: Iris image data KS ISO/IEC 19794-8:2011 Kenya Standard — Information technology — Biometric data interchange formats Part 8: Finger pattern skeletal data KS ISO/IEC 19794-9:2011 Kenya Standard — Information technology — Biometric data interchange formats Part 9: Vascular image data KS ISO/IEC 11693-1:2012 Kenya Standard — Identification cards — Optical memory cards Part 1: General characteristics KS ISO/IEC 11694-1:2012 Kenya Standard — Identification cards — Optical memory cards — Linear recording method Part 1: Physical characteristics KS ISO/IEC 11694-2:2012 Kenya Standard — Identification cards — Optical memory cards — Linear recording method Part 2: Dimensions and location of the accessible optical area KS ISO/IEC 7816-4:2013 Kenya Standard — Identification cards — Integrated circuit cards Part 4: Organization, security and commands for interchange KS ISO/IEC 9797-1:2011 Kenya Standard — Information technology — Security techniques — Message Authentication Codes (MACs) Part 1: Mechanisms using a block cipher KS ISO/IEC 9797-2:2011 Kenya Standard — Information technology — Security techniques — Message Authentication Codes (MACs) Part 2: "Mechanisms using a dedicated hash-function KS ISO/IEC 27033-3:2010 Kenya Standard — Information technology — Security techniques — Network security Part 3: Reference networking scenarios — Threats, design techniques and control issues KS ISO/IEC 27033-5:2013 Kenya Standard — Information technology — Security techniques — Network security Part 5: Securing communications across networks using virtual Private Networks (VPNs) KS ISO/IEC 27031:2011 Kenya Standard — Information technology — Security techniques — Guidelines for information and communication technology readiness for business continuity KS ISO/IEC 27032:2012 Kenya Standard — Information technology — Security techniques — Guidelines for cybersecurity KS ISO/IEC 27033-4:2014 Kenya Standard — Information technology — Security Techniques — Network security Part 4: Securing communications between networks using security gateways KS ISO/IEC 27034-1:2011 Kenya Standard — Information technology — Security techniques — Application security Part 1: Overview and concepts KS ISO/IEC 27037:2012 Kenya Standard — Information technology — Security techniques — Guidelines for identification, collection, acquisition and preservation of digital evidence KS ISO/IEC 24713-3:2009 Kenya Standard — Information technology — Biometric profiles for interoperability and data interchange Part 3: Biometrics-based verification and identification of seafarers KS ISO/IEC TR 24714-1:2008 Kenya Standard — Information technology — Biometrics — Jurisdictional and societal considerations for commercial applications Part 1: General guidance KS ISO/IEC TR 24722:2007 Kenya Standard — Information technology — Biometrics — Multimodal and other multibiometric fusion KS ISO/IEC 29141:2009 Kenya Standard — Information technology — Biometrics — Ten-print capture using biometric application programming interface (BioAPI) 17th January, 2020 THE KENYA GAZETTE 131 KS ISO/IEC 29159-1:2010 Kenya Standard — Information technology -- • Biometric calibration, augmentation and fusion data Part 1: Fusion . information format, KS ISO/IEC 18013-4:2011 Kenya Standard — Information technology — Personal identification — ISO- compliant driving license Part 4: Test methods KS ISO/IEC 24727-2:2008 Kenya Standard — Identification cards — Integrated circuit card programming interfaces Part 2: Generic card interface KS ISO/IEC 24727-3:2008 Kenya Standard — Identification cards — Integrated circuit card programming interfaces Part 3: Application interface KS ISO/IEC 24727-4:2008 Kenya Standard — Identification cards — Integrated circuit card programming interfaces Part 4: Application programming interface (API) administration KS ISO/IEC 24727-5:2011 Kenya Standard — Identification cards Integrated circuit card programming interfaces Part 5: Testing procedures KS ISO/IEC 24727-6:2010 Kenya Standard — Identification cards — Integrated circuit card programming interfaces Part 6: Registration authority procedures for the authentication protocols for interoperability KS ISO/IEC TR 29123:2007 Kenya Standard — Identification cards — Proximity cards — Requirements for the enhancement of interoperability KS ISO/IEC 24787:2010 Kenya Standard — Information technology —Identification cards — On-card biometric comparison KS ISO/IEC 24789-1:2012 Kenya Standard — Identification cards — Card service life Part 1: Application profiles and requirements KS ISO/IEC 24789-2:2011 Kenya Standard — Identification cards -- Card service life Part 2: Methods of evaluation KS ISO/IEC 29128:2011 Kenya Standard — Information technology — Security techniques — Verification of cryptographic protocols KS ISO/IEC 29150:2011 Kenya Standard — Information technology — Security techniques — Signcryption KS ISO/IEC 10116:2006 Kenya Standard• — Information technology — Security techniques — Modes of operation for an n-bit block cipher KS ISO/IEC 29100:2011 Kenya Standard — Information technology — Security techniques — Privacy framework KS ISO/IEC 18031:2011 Kenya Standard -Information technology — Security techniques — Random bit generation KS ISO/IEC 18032:2005 Kenya Standard — Information technology — Security techniques — Prime number generation KS ISO/IEC 11770-1:2010 " Kenya Standard — Information technology — Security techniques — Key management Part 1: Framework KS ISO/IEC 11889-1:2009' Kenya Standard — Information technology — Trusted Platform Module Part 1: Overview KS ISO/IEC 11889-2:2009 Kenya Standard — Information technology — Platform Module Part 2: Design principles KS ISO/IEC 11889-3:2009 Kenya Standard — Information technology — Trusted Platform Module Part 3: Structures KS ISO/IEC 11889-4:2009 Kenya Standard — Information technology -- Trusted Platform Module Part 4: Commands KS ISO/IEC 9797-1:2011 Kenya Standard — Information technology — Security techniques — Message Authentication Codes (MACs) Part 1: Mechanisms using a block cipher KS ISO/IEC 18014-1:2008 Kenya. Standard — Information technology — Security techniques — Time- stamping services Part 1: Framework KS ISO/IEC 18014-2:2009 Kenya Standard — Information technology — Security techniques — Time- stamping services Part 2: Mechanisms producing independent tokens KS ISO/IEC 18014-3:2009 Kenya Standard — Information technology — Security techniques — Time- stamping services Part 3: Mechanisms producing linked tokens KS ISO/IEC TR 29149:2012 Kenya Standard — Information technology — Security techniques — Best practices for the provision and use of time- stamping services KS ISO/IEC 10118-1:2000 Kenya Standard — Security techniques — Hash-functions Part 1: General KS ISO/IEC 10118-2:2010 Kenya Standard — Information technology — Security techniques — Hash- functions Part 2: Hash-functions KS ISO/IEC 10118-3:2004 Kenya Standard — Information technology — Security techniques — Hash- functions Part 3 Dedicated hash-functions KS ISO/IEC 10118-4:1998 Kenya Standard — Information technology — Security techniques — Hash- functions Part 4 Hash- functions using modular arithmetic KS ISO/IEC 29191:2012 Kenya Standard — Information technology — Security techniques — Requirements for partially anonymous, partially unlinkable authentication KS ISO/IEC 29192-1:2012 Kenya Standard — Information • technology — Security techniques — Lightweight cryptography Part 1: General KS ISO/IEC 29192-2:2012 Kenya Standard — Information technology — Security techniques — Lightweight cryptography Part 2: Block ciphers KS ISO/IEC 29192-3:2012 Kenya Standard — Information technology — Security techniques — Lightweight cryptography Part 3: Stream ciphers KS ISO/IEC 19772:2009 Kenya Standard — Information technology — Security techniques — Authenticated encryption KS ISO/IEC 18033-1:2005 Kenya Standard — Information technology — Security techniques — Encryption algorithms Part 1: General KS ISO/IEC 18033-2:2006 Kenya Standard — Information technology —Security techniques — Digital signature with appendix Part 2: Asymmetric ciphers KS ISO/IEC 18033-3:2010 Kenya Standard — Information technology —Security techniques — Digital signature with appendix Part 3: Block ciphers KS ISO/IEC 18033-4:2011 Kenya Standard — Information technology — Security techniques — Digital signature with appendix Part 4: Stream ciphers KS ISO/IEC 14888-1:2008 Kenya Standard — Information technology — Security techniques — Digital signature with appendix Part 1: General KS ISO/IEC 14888-2:2008 Kenya Standard — Information technology — Security techniques — Digital signature with appendix Part 2: Integer factorization based mechanisms KS ISO/IEC 14888-3:2006 Kenya Standard — Information technology — Security techniques — Digital signature with appendix Part 3: Discrete logarithm based mechanisms KS ISO/IEC 9796-2:2010 Kenya Standard — Information technology — Security techniques — Digital signature schemes giving message recovery Part 2: Integer factorization based mechanisms KS ISO/IEC 9796-3:2006 Kenya Standard — Information technology — Security techniques — Digital signature schemes giving message recovery Part 3: Discrete logarithm based mechanisms Food KS 206:2014 Kenya Standard — Cold storage of shell eggs — Code of practice KS CAC/GL 15:1991 Kenya Standard — Guidelines for the use of non-meat protein products in processed meat and poultry products KS ISO 13493:1998 Kenya Standard — Meat and meat products — Determination of chloramphenicol content — Method using liquid chromatography KS ISO 13496:2000 Kenya Standard — Meat and meat products — Detection of colouring agents — Method using thin-layer chromatography KS ISO 13965:1998 Kenya Standard — Meat and meat products — Detection of starch and glucose content — Enzymatic method KS ISO 1841-1:1996 Kenya Standard — Meat and meat products — Detection of chloride content Part 1: Volhard method KS ISO 1841-2:1996 Kenya Standard — Meat and meat products — Detection of chloride content Part 2: Potentiometric method KS ISO 2917:1974 Kenya Standard — Meat and meat products — Measurement of pH (Reference Method) KS ISO 3496:1994 Kenya Standard — Specification for meat and meat products — Determination of hydroxyproline content KS ISO 4133:1979 Kenya Standard — Specification for -meat and meat products — Determination of glucono- delta-lactone content (Reference Method) KS ISO 5553:1980 Kenya Standard — Specification for meat and meat products — Detection of polyphosphates KS ISO 6391:1997 Kenya Standard — Meat and meat products — Enumeration of Escherichia Coli — Colony count technique at 44 using membranes KS 2544: 2014 Kenya Standard — Edible egg albumen powder — Specification KS 2545:2014 Kenya Standard — Pickled quail eggs — Specification KS 2546:2014 Kenya Standard — Albumen flakes of non- edible quality — Specification KS 2576:2014 Kenya Standard — Egg powder Specification KS EAS 26:2000 Kenya Standard — Canned corned beef Specification KS EAS 84-1:2000 Kenya Standard — Meat grades and meat cuts — Specification Part 1: Beef grades and cuts, veal grades KS CODEX STAN 107:1981 Kenya Standard — General standard for the labelling of food additives when sold as such KS 385:1982 Kenya Standard — Specification for erythrosine, food grade colour KS CODEX STAN 146:1985 Kenya Standard — General standard for the labelling of and claims for prepackaged foods for special dietary uses KS CODEX STAN 180:1991 Kenya Standard — Standard for the labelling of and claims for foods for special medical purposes KS CODEX STAN 181:1991 Kenya Standard — Formula foods for use in weight control diets KS EAS 40:2000 Kenya Standard — Foods for infants and children — Methods of analysis KS CAC/GL 55:2005 Kenya Standard — Guidelines for vitamin and mineral food supplements KS EAS 72:2013 Kenya Standard — Processed cereal-based foods for infants and young children — Specification KS EAS 797:2013 Kenya Standard — Vitamin and mineral food supplements — Requirements KS 2515:2014 Kenya Standard — Formulated complementary foods for older infants and young children — Guidelines KS 1089:2014 Kenya Standard — Reduced salt-content foods — Specification KS 1074:2007 Kenya Standard — Millet flour — Specification KS ISO 2171:2007 Kenya Standard — Cereals, pulses and by- products — Determination of ash yield by incineration KS EAS 282:2002 Kenya Standard — Durum wheat semolina — Specification KS EAS 800:2013 Kenya Standard — Soya milk — Specification KS EAS 801:2013 Kenya Standard — Soya protein products — Specification KS EAS 802:2013 Kenya Standard — Textured soya protein products — Specification KS ISO 6644:2002 Kenya Standard — Flowing cereals and milled cereal products — Automatic sampling by mechanical means KS ISO 6820:1985 Kenya Standard — Wheat flour and rye flour — General guidance on the drafting of bread- making tests KS ISO 9648:1988 Kenya Standard — Specification for sorghum — Determination of tanning content KS 2176:2009 Kenya Standard — Popcorn — Specification KS 337:1981 Kenya Standard — Glossary of terms relating to starch KS ISO 15304:2002 Kenya Standard — Animal and vegetable fats and oils — Determination of the content of trans fatty acid isomers of vegetable fats and oils — Gas chromatographic method TECHNICAL CORRIGENDUM 1 KS EAS 298:2002 Kenya Standard — Edible cottonseed oil — Specification KS ISO 27107:2008 Kenya Standard — Animal and vegetable fats and oils — Determination of peroxide value — Potentiometric end-point determination KS ISO 22959:2009 Kenya Standard — Animal and vegetable fats and oils —Determination of polycyclic aromatic hydrocarbons by on-line donor-accept or complex chromatography and HPLC with fluorescence detection KS 1789:2003 Kenya Standard — Specification for olive oil, virgin and refined, and for refined olive-pomace oil 17th January, 2020 THE KENYA GAZETTE 133 KS 326-9:2003 Kenya Standard — Specification for edible fats and oirs Part 9: Lard KS 327:2013 Kenya Standard — Edible oils and fats — Methods of sampling and test KS ISO 661:2003 Kenya Standard — Animal and vegetable fats and oils — Preparation of test sample KS ISO 8294:1994 Kenya Standard — Animal and vegetable fats and oils- determination of copper, iron and nickel contents — Graphite furnace atomic absorption method KS 551:2012 Kenya Standard — Emulsified sauces Specification KS 327:2013 Kenya Standard — Edible oils and fats — Methods of sampling and test KS ISO 15301:2001 Kenya Standard — Animal and vegetable fats and oils — Determination of sediment in crude fats and oils KS ISO 5498:1981 Kenya Standard — Agricultural food products — Determination of crude fibre content- General method ' KS ISO 10539:2002 Kenya Standard — Animal and vegetable fats and oils — Determination of alkalinity KS ISO 12193:2004 Kenya Standard — Animal and vegetable fats and oils — Determination of lead by direct graphite furnace atomic absorption spectroscopy KS ISO 12966-1:2014 Kenya Standard — Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters Part 1: Guidelines on modern gas chromatography of fatty acid methyl esters KS ISO 15303:2001 Kenya Standard — Animal and vegetable fats and oils — Detection and identification of a volatile organic contaminant by GC/MS KS ISO 15305:1998 Kenya Standard — Animal and vegetable fats and oils — Determination of lovibond colour KS 326-1:2009 Kenya Standard — Edible fats and oils — Specification Part 1: Animal fats and oils KS 326-3:2009 Kenya Standard — Edible fats and oils — Specification Part 3: Vegetable and animal ghee KS CODEX STAN 124:1981 Kenya Standard — Codex Standard for edible coconut oil KS CODEX STAN 26:1981 Kenya Standard — Codex Standard for edible sesame seed oil KS EAS 304:2013 Kenya Standard — Edible corn oil Specification KS ISO 13547-1:2014 Kenya Standard — Copper, lead, zinc and nickel sulphide concentrates — Determination of arsenic Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method Agriculture KS ISO 11056:1999 Amd 1:2013 Kenya Standard — Sensory analysis — Methodology — Magnitude estimation method, AMENDMENT 1 KS ISO 8586:2012 Kenya Standard — Sensory analysis — General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors KS ISO 8587:2006 Amd 1:2013 Kenya Standard — Sensory analysis — Methodology — Ranking, AMENDMENT 1 KS ISO 8589:2007 Amd 1:2014 Kenya Standard — Sensory analysis — General guidance for the design of test rooms KS ISO 5495:2016 Amd 1:2006 Kenya Standard — Sensory analysis — Methodology — Paired comparison test, AMENDMENT 1 KS ISO 29842:2011 Amd 1:2015 Kenya Standard — Methodology — Balanced incomplete block designs KS ISO 7540:2006 Kenya Standard — Ground paprika (Capsicum annuum L.) — Specification KS 1747-1:2002 KS 1747-2:2002 KS 1747-3:2002 KS 1747-4:2003 KS 1747-5:2002 KS 1747-81002 Kenya Standard — Animal and vegetable fats and oils — Determination of unsaponifiable matter — Method using hexane extraction Kenya Standard — Animal and vegetable fats and oils — Determination of unsaponifiable matter — Method using diethyl ether extraction Kenya Standard — Animal and vegetable fats and oils — Determination of saponification value Kenya Standard — Specification for oil seed residues — Preparation of test samples Kenya Standard — Animal and vegetable fats and oils — Preparation of methyl esters of fatty acids Kenya Standard — Animal and vegetable fats and oils-- Sampling Kenya Standard — Animal and vegetable-fats and oils — Detection and identification of antioxidants — Thin-layer chromatography method Kenya Standard — Animal and vegetable fats and oils — Determination of melting point in open capillary tubes (slip point) Kenya Standard — Animal and vegetable fats and oils — determination of acid value and acidity Kenya Standard — Animal and vegetable fats and oils — Determination of water content - Entrainment method Kenya Standard — General concrete works — Code of practice Kenya Standard — Specification for lighting columns Part 9: Special requirements for reinforced and prestressed concrete lighting columns Kenya Standard — Specification for lighting columns Part 1: Definitions and terms Kenya Standard — Specification for lighting columns Part 2: Definitions and tolerances Kenya Standard — Specification for lighting columns Part 3: Specification for materials and welding requirements Kenya Standard — Specification for lighting columns Part 4: Recommendations for surface protection of metal lighting columns Kenya Standard — Specification for lighting columns Part 5: Specification for base compartments and cableways Kenya Standard — Specification for lighting columns Part 6: Specification for design loads Kenya Standard — Specification for lighting columns Part 7: Method for verification of structural design by calculation Kenya Standard — Specification for lighting columns Part 8: Method for verification of structural design by testing KS ISO 18609:2000 KS ISO 3596:2000 KS ISO 3657:2013 KS ISO 5502:1992 KS ISO 5509:2000 KS ISO 5555:2001 KS ISO 5558:1982 KS ISO 6321:2002 KS ISO 660:2009 KS ISO 934:1980 Engineering KS 2183:2009 KS 1747-9:2002 KS 1747-6:2002 KS 1747-7:2002 KS 1747-9:2002 Kenya Standard — Specification for lighting columns Part 9: Special requirements for reinforced and prestressed concrete lighting columns KS 2167-7:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 7: Concrete slab for test KS 22:2014 Kenya Standard — Hot-rolled mild steel bars for reinforcement of concrete — Specification KS 105:1982 Kenya Standard — Specification for hard drawn steel wire for reinforcement of concrete Leather and Textile KS ISO/TR 11827:2 012 Kenya Standard — Textiles — Composition testing — Identification of fibres KS ISO 12027:2012 Kenya Standard — Textiles — Cotton fibre stickiness — Detection of sugar content by colour reaction KS ISO 16549:2004 Kenya Standard — Textiles — Unevenness of textile strands — Capacitance KS ISO 6938:2012 Kenya Standard — Textiles — Natural fibres — Generic names and definitions KS 117-3:2008 Kenya Standard — Specification Part 3: Cotton leno cellular blankets KS 117-5:2008 Kenya Standard — Woven blankets — Specification Part 5: Blankets made from acrylic fibres Services KS ISO 8362-3:2001 Kenya Standard — Injection containers for injectables and accessories Part 3: Aluminium caps for injection vials KS ISO 8669-1:1988 Kenya Standard — Urine collection bags Part I: Vocabulary KS ISO 6009:1999 Kenya Standard — Hypodermic needles for single use — Colour coding for identification KS ISO 15010:1998 Kenya Standard — Disposable hanging devices for transfusion and infusion bottles — Requirements and test methods KS ISO 18153:2003 Kenya Standard — In vitro diagnostic medical devices — Measurement of quantities in biological samples — Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control KS 2368-9:2014 Kenya Standard — Academic quality assurance in higher education — Code of practice Part 9: Students with disabilities KS 2368-10:2014 Kenya Standard — Academic quality assurance in higher education — Code of practice Part 10: Admissions to higher education KS 2442-4:2014 Kenya Standard — Special educational needs — Code of practice Part 4: Identification, assessment and provision in Early Childhood Development and Education KS 2442-5:2014 Kenya Standard — Special educational needs — Code of practice Part 5: Identification, assessment and provision in primary education KS ISO 8669-2:1996 Kenya Standard — Urine collection bags Part 2: Requirements and test methods KS ISO 10555-3:2013 Kenya Standard — Sterile, single-use intravascular catheters Part 3: Central venous catheters KS ISO 10555-4:2013 Kenya Standard — Sterile, single-use intravascular catheters Part 4: Balloon dilation catheters KS ISO 10555-5:2013 Kenya Standard — Sterile, single-use intravascular catheters Part 5: Over-needle peripheral catheters KS ISO 16175-3:2010 Kenya Standard — Information and documentation — Principles and functional requirements for electronic office environments Part 3: Guidelines and functional requirements for records in business systems KS ISO 21103:2014 Kenya Standard — Adventure tourism — Information for participants KS ISO 21101:2014 Kenya Standard — Adventure tourism — Safety management systems — Requirements KS ISO 24801-1:2014 Kenya Standard — Recreational diving services — Safety related minimum requirements for the training of recreational scuba divers Part 1: Level 1 — Supervised diver KS ISO 24801-2:2014 Kenya Standard — Recreational diving services — Related minimum requirements for the training of recreational scuba divers Part 2: Level 2 — Autonomous diver KS ISO 24801-3:2014 Kenya Standard — Recreational diving services — Safety related minimum requirements for the training of recreational scuba divers Part 3: Level 3 — Dive leader KS ISO 24802-1:2014 Kenya Standard — Recreational diving services — Safety related minimum requirements for the training of scuba instructors Part 1: Level 1 KS ISO 24802-2:2014 Kenya Standard — Recreational diving services — Safety related minimum requirements for the training of scuba instructors Part 2: Level 2 KS ISO 28564-1:2010 Kenya Standard — Public information guidance systems Part 1: Design principles and element requirements for location plans maps and diagrams KS ISO 17398:2004 Kenya Standard — Safety colours and safety signs — Classification, performance and durability of safety signs KS ISO 12931:2012 Kenya Standard — Performance criteria for authentication solutions used to combat counterfeiting of material goods KS ISO/TS 18152:2010 Ergonomics of the human-system interaction — Specification for the process assessment of human-system issues KS IEC 60601-2-28:1993 Kenya Standard — Medical electrical equipment Part 2-28: Particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis. KS IEC 60601-2-9:1996 Kenya Standard — Medical electrical equipment Part 2-9: Particular requirements for the safety of patient contact dosemeters used in radiotherapy with electrically connected radiation detectors Kenya Standard — Societal security — Guidelines for establishing partnering arrangements Kenya Standard — Societal security — Guidelines for establishing partnering arrangements Kenya Standard — Environmental management — Life cycle assessment — Requirements and guidelines KS ISO/TS 14048:2002 Kenya Standard — Environmental management — Life cycle assessments — Data documentation format KS ISO/TR 14047:2012 Kenya Standard — Environmental management — Life cycle assessment — Illustrative examples on how to apply ISO 14044 to impact assessment situations KS ISO 22397:2014 KS ISO 22311:2012 KS ISO 14044:2006 17th January, 2020 THE KENYA GAZETTE 135 KS ISO 14066:2011 Kenya Standard — Greenhouse gases — Competence requirements for greenhouse gas validation teams and verification teams KS ISO/TS 14033:2012 Kenya Standard — Environmental management — Quantitative environmental information — Guidelines and examples KS ISO 8421-1:1987 Kenya Standard — Fire protection — Vocabulary Part 1: General terms and phenomena of fire KS ISO 8421-2:1987 Kenya Standard — Fire protection — Vocabulary Part 2: Structural fire protection KS ISO 8421-6:1987 Kenya Standard — Fire protection — Vocabulary Part 6: Evacuation and means of escape KS ISO 8421-7:1987 Kenya Standard — Fire protection — Vocabulary Part 7: Explosion detection and suppression means KS ISO 19005-1:2005 Kenya Standard — Document management — Electronic document file format for long-term preservation Part 1: Use of PDF 1.4 (PDF/A-1) KS ISO 9707:2008 Kenya Standard — Information and documentation — Statistics on the production and distribution of books, newspapers, periodicals and electronic publications KS ISO/TR 26122:2008 Kenya Standard — Information and documentation — Work process analysis for records KS 2820:2018 Kenya Standard — Height adjustable swivel chairs — Specification The following standards are withdrawn forthwith; Chemical KS 420-1:2010 Kenya Standard — Paper and board — Test methods Part 1: Determination of pH, To be replaced by KS ISO 6588-1:2012 and KS ISO 6588-2:2012 KS 420-2:2010 Kenya Standard — Paper and board — Test methods Part 2:. Determination of ash content. To be replaced by KS ISO 1762:2019 and KS ISO 2144:2019 KS 420-3:2010 Kenya Standard — Paper and board — Test methods Part 3: Determination of machine direction, To be replaced by KS ISO 216:2007 KS 420-4:2010 Kenya Standard — Paper and board — Test methods Part 4: Determination of top-side and wire side, To be replaced by KS ISO 216:2007 KS 420-6:2010 Kenya Standard — Paper and board — Test methods Part 6: Determination of bursting strength, To be replaced by KS ISO 2758:2014 KS 420-7:2010 Kenya Standard — Paper and board — Test methods Part 7: Determination of folding endurance, To be replaced by KS ISO 5626:1993 KS 420-8:2010 Kenya Standard Paper and board — Test methods Part 8: Determination of tearing resistance, To be replaced by KS ISO 1974:2012 KS 420-9:2010 Kenya Standard — Paper and board — Test methods Part 9: Determination of sizing Replaced by no suitable replacement. Withdrawn without replacement, depends on desired performance requirements. KS 420-11:2010 Kenya Standard — Paper and board — Test. methods Part 11: Determination of water absorbency — Drop method, To be replaced by KS ISO 535:2014 KS 420-12:2010 Kenya Standard — Paper and board — Test methods Part 12: Determination of oil absorbency, To be replaced by KS ISO 16532- 1:2008, KS ISO 16532-2:2007 and KS ISO 16532-3:2010 KS 420-13:2010 Kenya Standard — Paper and board — Test methods Part 13: Determination of opacity, To be replaced by KS ISO 2471:2008 KS 420-14:2010 Kenya Standard — Paper and board — Test methods Part 14: Determination of brightness (ISO brightness), To be replaced by KS ISO 2470-1:2016 KS 420-15:2010 Kenya Standard — Paper and board — Test methods Part 15: Determination of roughness by constant-pressure air flow method, To be replaced by KS ISO 8791-1:1986, KS ISO 8791-2:2013, KS ISO 8791-3:2017 KS 420-16:2010 Kenya Standard — Paper and board — Test methods Part 16: Determination of fibre composition (furnish) qualitative test, To be replaced by KS ISO/TR 10688:2015 KS 420-17:2010 Kenya Standard — Paper and board — Test methods Part 17: Determination of thickness for single sheets, bulk thickness and apparent density, To be replaced by KS ISO 534:2011 KS ISO 21207:2004 Kenya Standard — Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion promoting gases, neutral salt-spray and drying, To be replaced by KS ISO 21207:2015 KS ISO 2758:2001 Kenya Standard — Paper — Determination of bursting strength, To be replaced by KS ISO 2758:2014 Food KS ISO 9936:2006 Kenya Standard — Animal and vegetable fats and oils — Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography, To be replaced by KS ISO 9936:2016 KS ISO 662:1998 Kenya Standard — Animal and Vegetable fats and oils — Determination of moisture and volatile matter content, To be replaced by KS ISO 662:2016 KS ISO 15774:2000 Kenya Standard — Animal and vegetable fats and oils — Determination of cadmium content by- direct graphite furnace atomic absorption spectrometry, To be replaced by KS ISO 15774:2017 KS ISO 3961:1996 Kenya Standard — Animal and vegetable fats and oils — Determination of iodine value, To be replaced by KS ISO 3961:2018 KS ISO 6320:1995 Kenya Standard — Animal and vegetable fats and oils — Determination of refractive index, To be replaced by KS ISO 6320:2017 KS ISO 6883:2007 Kenya Standard — Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air), To be replaced by KS ISO 6883:2017 KS ISO 6884:1985 Kenya Standard — Animal and vegetable fats and oils — Determination of ash, To be replaced by KS ISO 6884:2008 KS ISO 6885:1998 Kenya Standard — Animal and vegetable fats and oils — Determination of anisidine value, To be replaced by KS ISO 6885:2016 KS ISO 8534:1996 Kenya Standard — Animal and vegetable fats and oils — Determination of water content Karl Fisscer method, To be replaced by KS ISO 8534:2017 • KS ISO 935:1988 Kenya Standard — Animal and vegetable fats and oils — Determination of titre, To be replaced by KS ISO 935:1998 KS ISO 5530-1:1997 Kenya Standard — Specification for wheat flour - Physical characteristics of doughs Part 1: Determination of water absorption and rheological properties using a farinograph, To be replaced by KS ISO 5530-1:2013 KS ISO 7305:1998 Kenya Standard — Specification for milled cereal products — Determination of fat acidity, To be replaced by KS ISO 7305:2019 KS ISO 5508:1990 Kenya Standard — Animal and vegetable fats and oils — Analysis by gas chromatography of methyl esters of fatty acids, To be replaced by KS ISO 12966-1:2014 and KS ISO 12966- 4:2015 Agriculture KS ISO 16820:2004 Kenya Standard — Sensory analysis — Methodology — Sequential analysis, To be replaced by KS ISO 16820:2019 Engineering KS ISO 6935-2:2007 Kenya Standard — Steel for the reinforcement of concrete Part 2: Ribbed bars. To be replaced by KS EAS 412-2:2019 KS 104:2017 Kenya Standard — Cold rolled steel sections — Specification. To be replaced by KS EAS 134:2019 KS 2712:2017 Kenya Standard — Steel for the reinforcement of concrete — Weldable reinforcing steel — Bar, coil and decoiled product — Specification. To be replaced by KS EAS 412-2:2019 KS 574:2017 Kenya Standard — Steel fabric for reinforcement of concrete — Specification. To be replaced by KS EAS 412-3 2019 Leather and Textile force using the strip method. To be replaced by KS ISO 13934-1:2013 KS ISO 13934-2:1999 Kenya Standard — Textiles — Tensile properties of fabrics Part 2: Determination of maximum force to the grab method. To be replaced by KS ISO 13934-2:2014 KS 120:1981 Kenya Standard — Method for determination of mass per unit length and mass per unit area of woven or knitted fabrics, To be replaced by KS ISO 3801:1977 KS 121:1981 Kenya Standard — Methods for determination of threads per centimeter in woven fabrics, To be replaced by KS ISO 7211-2:1984 KS 893-2:1994 Kenya Standard — Specification for upholstery fabrics Part 2: Coated fabrics. / woven fabrics, To be replaced by KS ISO 7617-1:2001 KS 834-1:1987 Kenya Standard — Test methods for determination of dimensions of woven fabrics Part 1: Measurement of width of pieces./ Woven Fabrics, To be replaced by KS ISO 22198:2006 KS 834-2:1987 Kenya Standard — Test methods for determination of dimensions of woven fabrics Part 2: Measurement of length of pieces, To be replaced by KS ISO 22198:2006 KS 437:1985 Kenya Standard — Method for determination of tear resistance of woven fabrics by falling pendulum (Elmendorf) apparatus, To be replaced by KS ISO 13937-1:2000 KS 48:1979 Kenya Standard — Determination of resistance to tearing of woven fabrics by wing-rip technique. To be replaced by KS ISO 13937- 3:2000 Dated the 8th January, 2020. BERNARD NJIRAINI, PTG 1296/19-20 Secretary, National Standards Council.