GAZETTE NOTICE NO. 7459

PURSUANT to section 9 (1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the Schedule hereto to be Kenya Standards with effect from the date of publication of this notice. Number Title of Specification or Code of Practice Chemical KS 2865:2019 Kenya Standard — Anhydrous ammonia — Storage and handling, First Edition KS 2866:2019 Kenya Standard — Storage and handling of toxic substances, First Edition KS ISO 6974-1:2012 Kenya Standard — Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 1: General guidelines and calculation of composition, First Edition KS ISO 69742:2012 Kenya Standard — Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 2: Uncertainty calculations, First Edition KS ISO 6974-3:2018 Kenya Standard -- Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 3: Precision and bias, First Edition KS ISO 6974-4:2000 Kenya Standard -- Natural gas — Determination of composition with defined uncertainty by gas chromatography Part 4: Determination of nitrogen, carbon dioxide and Cl to C5 and C6+ hydrocarbons for a laboratory, First Edition KS ISO 6974-5:2014 Kenya Standard — Natural gas — Determination of &imposition and .associated uncertainty by gas chromatography Part 5: Isothermal method for nitrogen, carbon dioxide, Cl to C5 hydrocarbons 'and C6+ hydrocarbons, First Edition KS ISO 6974-6:2002 Kenya Standard — Natural gas — Determination of composition with defined uncertainty by gas chromatography Part 6: Determination of hydrogen, • helium, oxygen, nitrogen, carbon dioxide and Cl to C8 hydrocarbons using three capillary columns, First Edition KS ISO 6975:1997 Kenya Standard — Natural gas — Extended analysis — Gas-chromatographic method, First EditiOn KS ISO 6976:2016 Kenya Standard — Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition, First Edition KS ISO 6978-1:2003 Kenya Standard — Natural gas — Determination of mercury Part 1: Sampling of mercury by, chemisorption on iodine, First Edition KS ISO 6978-2:2003 Kenya Standard — Natural gas — Determination of mercury Part 2: Sampling of mercury by amalgamation on gold/platinum alloy, First Edition KS ISO 12213-1:2006 Kenya Standard — Natural gas — Calculation of compression factor — Part 1: Introduction and guidelines, First Edition KS ISO 12213-2:2006 Kenya Standard — Natural gas — Calculation of compression factor —.Part 2: Calculation using molar-composition analysis, First Edition KS ISO 12213-3:2006 Kenya Standard— Natural gas — Calculation of compression factor — Part 3: Calculation using <physical properties, First Edition KS ISO 14111:1997 Kenya Standard — Natural gas — Guidelines to traceability in analysis, First Edition KS ISO 16960:2014 Kenya Standard — Natural gas Determination of sulfur compounds Determination of total sulfur by oxidative microcoulometry method, First Edition KS ISO 18453:2004 Kenya Standard — Natural gas — Correlation between water content and water dew point, First Edition KS ISO 23874:2006 Kenya Standard — Natural gas — Gas chromatographic requirements for hydrocarbon dewpoint calculation, First Edition KS ISO 10545-4:2019 Kenya Standard — Ceramic tiles Part 4: Determination of modului of rupture and breaking strength, Second Edition KS ISO 10545-6:2010 Kenya Standard — Ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles, Second Edition Kenya Standard — Hermetic storage bags — Specification, First Edition Kenya Standard — Portable rigid plastic hermetic grain silo — Specification, First Edition KS 2873:2019 KS 2874:2019 Electrotechnical KS 2847-1:2019 KS 2847-2:2019 KS 2847-3:2019 KS 2847-4:2019 KS ISO 19104:2016 KS ISO 19119:2016 Kenya Standard — Software engineering — Antivirus — Fundamental principles and, vocabulary, First Edition Kenya Standard — Software engineering — Antivirus — Protection against targeted attacks, First Edition Kenya Standard — Software engineering — Antivirus — Sampling, First Edition Kenya Standard — Software engineering — Antivirus — Test Methods, First Edition Kenya Standard — Geographic information — Terminology, First Edition Kenya Standard — Geographic information — Services, First Edition KS ISO/TR 19120:2001 Kenya Standard — Geographic information — Functional standards, First Edition KS ISO/TR 19121:2000 Kenya Standard — Geographic information — Imagery and gridded data, First Edition KS ISO/TS 19129:2000 Kenya Standard — Geographic information — Imagery, gridded and coverage data framework, First Edition. KS ISO 19132:2007 Kenya Standard — Geographic information — Location-based services — Reference model, First Edition KS ISO 19137:2007 Kenya Standard — Geographic information — Core profile of the spatial schema, First Edition KS ISO 19145:2013 Kenya Standard — Geographic information — Registry of representations of geographic point location, First Edition KS ISO/IEC 19788-1 :2011/Amd 1:2014 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources Part 1: Framework, First Edition KS ISO/IEC 19788-2:2011/Amd 1:2016 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources Part 2: Dublin Core elements, First Edition KS ISO/IEC 2382:2015 Kenya Standard — Information technology — Vocabulary, Second Edition KS ISO/IEC 29109-5:2014 Kenya Standard — Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 5: Face image data, Second Edition KS ISO/IEC TS 27008:2019 Kenya Standard — Information technology — Security techniques — Guidelines for the assessment of information security controls, Second Edition KS ISO/IEC 27018:2019 Kenya Standard — Information technology — Security techniques — Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors, Second Edition KS ISO/IEC 29147:2018 Kenya Standard — Information technology Security techniques — Vulnerability disclosure, Second Edition KS ISO/IEC 9798-3:2019 Kenya Standard — Information technology — Security techniques — Entity authentication Part 3: Mechanisms using digital signature techniques, Second Edition KS ISO/IEC 10118-3:2018 Kenya Standard — Information technology — Security techniques`— Hash-functions Part 3: Dedicated hash-functions, Second Edition KS ISO/IEC 11770-2:2018 Kenya Standard — Information technology — Security techniques — Key management Part 2: Mechanisms using symmetric techniques, Second Edition KS ISO/IEC 14888-3:2018 Kenya Standard — Information technology — Security techniques — Digital signatures with appendix Part 3: Discrete logarithm based mechanisms, Second Edition KS ISO/TR 19083-1:2016 Kenya Standard — Intelligent transport systems— Emergency evacuation and disaster response and recovery Part 1: Framework and concept of operation, First Edition KS ISO 24978:2009 Kenya Standard — Intelligent transport systems — ITS Safety and emergency messages using any available wireless media — Data registry procedures, First Edition KS ISO 18682:2016 Kenya Standard — Intelligent transport systems — External hazard detection and notification systems — Basic requirements, First Edition KS ISO 14814:2006 Kenya Standard — Automatic vehicle and equipment identification — Reference architecture and terminology, First Edition KS ISO 14815:200fi Kenya Standard — Automatic vehicle and equipment identification — System specifications, First Edition KS • ISO 14816:20 05 Kenya Standard — Automatic vehicle and equipment identification — Numbering and data structure, First Edition KS ISO 24534-1 :2010 Kenya Standard — Automatic vehicle and equipment identification ' — Electronic registration identification (ERI) for vehicles Part 1: Architecture, First Edition KS ISO 22839:2013 Kenya Standard — Intelligent transport systems — Forward vehicle collision mitigation systems — Operation, performance, and verification requirements, First Edition KS ISO 24100:2010 Kenya Standard — Intelligent transport systems — Basic principles for personal data protection in probe vehicle information services, Pirst Edition KS ISO/TR 21707:2008 Kenya Standard — Intelligent transport systems — Integrated transport information, management and control -- Data quality in ITS systems, First Edition KS ISO 17573:2010 Kenya Standard — Electronic fee collection — Systems architecture for vehicle-related tolling, First Edition KS ISO/TS 19299:2015 Kenya Standard — Electronic fee collection — Security framework, First Edition KS ISO 17185-1:2014 Kenya Standard — Intelligent transpOrt systems — Public transport user information Part 1: Standards framework for public information systems, First Edition KS IEC 61730-1:2016 Kenya Standard — Photovoltaic (PV) module safety qualification Part 1: Requirements for construction, Second Edition KS IEC 61730-2:2016 Kenya Standard — Photovoltaic (PV) module safety qualification Part 2: Requirements for testing, Secotad Edition KS IEC 61829:2015 Kenya Standard — Photovoltaic (PV) array — On-site measurement of current-voltage characteristics, First Edition KS EAS 117-1:2008 Kenya Standard — Electric cables — Flexible cords rate:d up to 300/500 V, for use with appliances, and equipment intended for domestic., office and similar environments, First Edition KS EAS 117-2:2008 Kenya 5;tandard — Electric cables — Flexible cables rated up to 450/750 V, for use with appliani zes and equipment intended for industri al and similar environments, First Edition KS IEC 60598-1:2017 Kenya Standard — Luminaires Part 1: General require :ments and tests, Second Edition KS ISO 4037-1:2019 Kenya Standard — Radiological protection -- X and gamma reference radiation for calibrating dosen ieters and doserate meters and for deterr fining their response as a function of photo n energy Part 1: Radiation characteristics and p roduction methods, First Edition KS ISO 4037-2:2019 Ken} fa Standard — Radiological protection — X an d gamma reference radiation for calibrating dose meters and doserate meters and for dete rmining their response as a function of phot ton energy Part 2: Dosimetry for radiation prot ection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV, First Edition 9th August, 2019 THE KENYA GAZETTE 2891 KS 1 SO 4037-3:2019 Kenya Standard --- Radiological protection — X and gamma ri,:ference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy Part 3: Calibration of area and personal doserneters and the measurement of their response as a function of energy and angle of incidence, F irst Edition KS ISO 4037,4:2019 Kenya Standard — Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy Part 4: Calibration of area and personal do.semeters in low energy X reference radiation fiends, First Edition Engineering KS 1515:2019 Kenya Standard — Road vehicles -- Inspection of road vehicles — Code of practice, Second Edition KS 1814:2019Kenya Standard — Biomass stoves — ' Performance requirements, Fourth Edition KS ISO 19867-1;2018 Kenya Standard — Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols Part 1: Standard test sequence for emissions and performance, safety and durability, First Edition KS ISO 13232-1:2005 Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 1: Definitions, symbols and general considerations, First Edition KS ISO 13232-1:2005/Amd 12012 Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 1: Definitions, symbols and general considerations, AMENDMENT 1, First Edition KS ISO 13232-2:2005 Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 2: Definition of impact conditions in relation to accident data, First Edition KS ISO 13232-3:2005 Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 3: Motorcyclist anthropometric impact dummy, First Edition KS ISO 13232-3:2005/Amd 1:2012 Kenya Standard — MATD test helmet rider crash protective devices fitted to motorcycles Part 6: Full-scale impact-test procedures, AMENDMENT 1, First Edition KS ISO 13232-4:2005 Kenya Standard — Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 4: Variables to be measured, instrumentation and measurement procedures, First Edition KS ISO 13232-5:2005 Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation. of rider crash plotective devices fitted to motorcycles Part 5: Injury indices and risk/benefit analysis, First Edition KS ISO 13232-5:2005/Amd 1:2012 Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 5: Injury indices and risk/benefit analysis, Amendment 1, First Edition KS ISO 13232-6;2005 Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 6: Full-scale impact-test procedures, First Edition KS ISO 13232-6:2005/Amd 1:2012 Kenya Standard — Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 6: Full-scale impact-test procedures, AMENDMENT 1, First. Edition KS ISO 13232-7:2005 Kenya. Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests, First Edition KS ISO 13232-7:2005/Amd 1:2012 Kenya Standard — Kenya StancLard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests, AMENDMENT 1, First Edition KS ISO 13232-8:2005 Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 8: Documentation and reports, First Edition KS ISO 13232-8:2005/Amd 1:2012 Kenya Standard — Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 8: Documentation and reporti, AMENDMENT 1, First Edition • KS ISO 14722:1998 Kenya Standard — Moped and moped-rider kinematics — VocabularY, First Edition KS ISO 14722:1998/Amd 1:2011 Kenya Standard — Moped and moped-rider kinematics — Vocabulary, AMENDMENT 1, First Edition KS ISO 17479:2013 Kenya Standard — Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance, First Edition KS ISO 18580:2015 Kenya Standard -- Motorcycles — Verification of total running resistance force during mode running on a chassis dynamometer, First Edition KS ISO 19689:2016 Kenya Standard- Motorcycles and mopeds — Communication between vehicle and external equipment for diagnostics — Diagnostic connector and related electrical circuits, specification and use, First Edition KS ISO 28981:2009 Kenya Standard — Mopeds — Methods for setting the running resistance on a chassis dynamometer, First Edition KS ISO 28981:2009/Amd 1:2015 Kenya Standard — Mopeds — Methods for setting the running resistance on a chassis dynamometer, First Edition KS ISO 20766-1:2018 Kenya Standard — Road vehicles Liquefied petroleum gas (LPG) fuel systems components Part 1: General requirements and definitions, First Edition KS ISO 20766-2:2018 Kenya Standard — Road vehicles — Liquefied petroleum gas (LPG) fuel systems components Part 2: Performance and general test methods, First Edition KS ISO 20766-3:2018 Kenya Standard — Road vehicles — Liquefied petroleum gas (LPG) fuel systems components Part 3: 80% stop valve, First Edition KS ISO 20766-4:2018 Kenya Standard — Road vehicles — Liquefied • petroleum gas (LPG) fuel system components Part 4: Level indicator, First Edition KS ISO 20766-6:2019 Kenya Standard — Road vehicles — Liquefied petroleum gas (LPG) fuel systems components Part 6: Pressure relief valves (PRV) , First Edition KS ISO 20766-9:2019 Kenya Standard — Road vehicles — Liquefied petroleum gas (LPG) fuel systems components Part 9: Pressure relieve device (PRD) , First Edition KS ISO 16232:2018 Kenya Standard — Road vehicles — Cleanliness of components and systems, First Edition KS ISO 6469-1:2019 Kenya Standard — Electrically propelled road vehicles — Safety specifications Part 1: Rechargeable energy storage system (RESS) , Second Edition KS ISO 6469-3:2018 Kenya Standard — Electrically propelled road vehicles — Safety specifications Part 3: Electrical safety, Second Edition KS ISO 12405-4:2018 Kenya Standard — Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems Part 4: Performance testing, Second Edition KS EAS 924-1:2018 Kenya Standard — Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice Part. I : Storage and filling sites for refillable LPG containers of capacity not exceeding 150 1, First Edition KS EAS,924-2:2018 Kenya Standard — Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice Part 2: LPG installations involving gas storage vessels of individual water capacity exceeding 150 1 and combined water capacity not exceeding 9 000 1 per installation, First Edition KS EAS 925:2018 Kenya Standard — Inspection and testing of Liquefied Petroleum Gas (LPG) road tankers, First Edition KS EAS 902:2018 Kenya Standard — Bulk Liquefied Petroleum Gas (LPG) road tankers — Assembling — Requirements, First Edition KS EAS 903:2018 Kenya Standard — Road tankers — Welded steel tanks for Liquefied Petroleum Gas (LPG) — Design and manufacture, First Edition KS ISO 799-1:2019 Kenya Standard — Ships and marine technology — Pilot ladders Part I: Design and specification, First Edition KS ISO 5620-1:1992 Kenya Standard — Ships and marine structures — Filling connection for drinking water tanks Part 1: General requirements, First Edition KS ISO 5620-2:1992 Kenya Standard — Ships and marine structures — Filling connection for drinking water tanks Part 2: Components, First Edition KS ISO 14726:2008 Kenya Standard — Ships and marine technology — Identification colours for the content of piping systems, First Edition KS ISO 15364 :2016 Kenya Standard — Ships and marine technology -- Pressure/ vacuum valves for cargo tanks, First Edition KS ISO 15837:2004 Kenya Standard — Ships and marine technology — Gasketed mechanical couplings for use in piping systems — Performance specification, First Edition KS ISO 15749-4:2004 Kenya Standard - — Ships and marine technology — Drainage systems on ships and marine structures Part 4: Sanitary drainage, sewage disposal pipes, First Edition KS ISO 15749-5:2004 Kenya Standard — Ships and marine technology Part 5: Drainage of decks, cargo spaces and swimming pools, First Edition KS ISO 5483:2003 Kenya Standard — Ships and marine technology — Drain facilities from oil and water tanks, First Edition KS ISO 3797:1976 Kenya Standard — Ships building — Vertical steel ladders, First Edition KS ISO 5488:2015 Kenya Standard — Ships building — Accommodation ladders, First Edition KS ISO 5489:2007 Kenya Standard — Ships and marine technology — Embarkation ladders, First Edition KS ISO 8383:1985 Kenya Standard — Lifts on ships — Specific requirements, First Edition KS ISO 11617:2001 Kenya Standard — Ships and marine technology — Shipboard incinerators — Requirements, First Edition KS ISO 23269-2:2011 Kenya Standard — Ships and marine technology — Breathing apparatus for ships- Part 2: Self- contained breathing apparatus for shipboard firefighters, First Edition KS ISO 23269-1:2008 Kenya Standard — Ships and marine technology — Breathing apparatus for ships Para: Emergency escape breathing devices (EEBD) for shipboard use, First Edition KS ISO 22157:2019 Kenya Standard — Bamboo structures — Determination of physical and mechanical properties of bamboo culms — Test methods, First Edition KS ISO 8965:2013 Kenya Standard — Logging industry — Technology — Terms and definitions, Second Edition KS ISO 8375:2017 Kenya Standard — Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties, First Edition KS ISO 18100:2017 Kenya Standard — Timber structures — Finger- jointed timber — Manufacturing and production requirements, First Edition KS ISO 24294:2013 Kenya Standard — Timber — Round and sawn timber — Vocabulary, First Edition KS ISO 13910:2014 Kenya Standard — Timber structures — Strength graded timber — Test methods for structural properties, First Edition KS ISO 16507:2013 Kenya Standard — Timber structures — Uniform, concentrated static and concentrated impact loads on wood-based roof and floor panel assemblies — Test methods, First Edition KS 2877:2019 Kenya Standard -- Sustainable management and harvesting of bamboo species — Guidelines, First Edition KS ISO 17754:2014 Kenya Standard — Timber structures — Test methods — Torsional resistance of driving in screws, First Edition KS 2801-1:2019 Kenya Standard — Masonry units — Specification Part 1: Clay masonry units, First Edition KS 2802-1:2019 Kenya Standard — Masonry units — Test methods Part I: Determination of compressive strength, First Edition KS 2802-3:2019 Kenya Standard — Masonry units — Test methods Part 3: Determination of the active soluble salts content of clay masonry units, First Edition KNWA 2885:2019 Kenya Standard — Meter for dispensing liquefied petroleum gas (LPG) from cylinder — Specification, First Edition Food KS 28-1:2019 Kenya Standard — Cheese — Specification Part 1: General requirements, Fourth Edition KS 28-2:2019 Kenya Standard —Cheese — Specification Part 2: Cheddar, Fourth Edition KS 28-3:2019 Kenya Standard —Cheese — Specification Part 3: Gouda, Fourth Edition KS 2853:2019 Kenya Standard — Danbo cheese Specification, First Edition KS 2683:2019 Kenya Standard — Brie cheese Specification, Second Edition KS 2682:2019 Kenya Standard — Camembert cheese — Specification, Second Edition KS 28-4:2019 'Kenya Standard -- Cheese — Specification Part 4: Tilsiter, Fourth Edition KS 2850:2019 Kenya Standard — Cheeses in brine Specification, First Edition KS 2510:2019 Kenya Standard — Evaporated milks Specification, Second Edition KS 2509:2019 Kenya Standard — Processed cheese — Specification, Second Edition KS 2688:2019 Kenya Standard — Certain canned fruits Specification, Second Edition KS 2689:2019 Kenya Standard — Quick frozen vegetables, Second Edition KS 2687:2019 Kenya Standard — Pickled fruits and vegetables — Specification, Second Edition KS 1178:2019 Kenya Standard — Canned tropical fruit salad — Specification, SecOnd Edition KS 2851:2019 Kenya Standard — Canned Apple sauce — Specification, First Edition KS 2852:2019 Kenya Standard — Canned stone fruits — Specification, First Edition KS 2166:2019 Kenya Standard — Icing sugar and sugar cubes — Specification, Second Edition KS 436-2:2019 Kenya Standard—Cocoa powder— Specification Part 2: Cocoa-sugar mixtures, Fourth Edition KS 998:2019 KS 2862:2019 Kenya Standard -- Chocolates — Specification, Second Edition Kenya Standard—Cocoa butter—Specification, First Edition Agriculture KS ISO 16577:2016 Kenya Standard—Molecular biomarker analysis — Terms and definitions, First Edition KS ISO 16578:2013 Kenya Standard—Molecular biomarker analysis —General definitions and requirements for microarray detection of specific nucleic acid sequences, First Edition KS ISO 13495:2013 Kenya Standard—Foodstuffs—Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid, First Edition KS 2859:2019 KS 2860:2019 Kenya Standard — Sweetpotato bread Specification, First Edition Kenya Standard — Sweetpotato puree Specification, First Edition 9th August, 2019 THE KENYA GAZETTE 2893 KS 2802-6:2019 Kenya Standard — Masonry units — Test methods Part 6: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units, First Edition KS 2802-8:2019 Kenya Standard -- Masonry units — Test methods Part 8: Determination of dimensions, First Edition KS 2802-9:2019 Kenya Standard — Masonry units — Test methods Part 9: Determination of moisture expansion of large horizontally perforated clay masonry Test methods Part 10: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units, First Edition KS 2802-10:2019 Kenya Standard — Masonry units — Test methods Part 10: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units KS 2802-11:2019 Kenya Standard — Masonry units — Test methods Part 11: Determination of water absorption of clay and calcium silicate masonry units by cold-water absorption, First Edition KS 2802-12:2019 Kenya Standard — Masonry units — Test methods Part 12: Determination of initial shear strength, First Edition KS 2803:2019 Kenya Standard — Masonry and masonry products — Methods for determining thermal properties, First Edition KS 2804-1:2019 Kenya Standard — Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests, First Edition KS ISO 3834-1:2005 Kehya Standard — Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements, First Edition KS ISO 5817:2014 Kenya Standard — Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections, First Edition KS ISO 9606-1:2012 Kenya Standard — Qualification testing of welders — Fusion welding Part 1: Steels, First Edition KS ISO 9606-2:2012 Kenya Standard — Qualification test of welders — Fusion welding Part 2: Aluminium and aluminium alloy, First Edition KS ISO 15012-1:2012 Kenya Standard — Health and safety in welding and allied processes — Equipment for capture and separation of welding fume Part 1: Requirements for testing and marking of separation efficiency, First Edition KS ISO 15012-4:2016 Kenya Standard — Health and safety in welding and allied Processes-Equipment for capture and separation of welding fume• Part 4: General requirements, First Edition KS ISO 15012-2:2008 Kenya Standard — Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles, First Edition KS ISO 25980:2014 Kenya Standard — Health and safety in welding and allied processes — Transparent welding curtains, strips and screens for arc welding processes, First Edition KS 2861:2019 Kenya Standard — Production and handling of sweet potatoes — Code of practice, First Edition KS ISO 18794:2018 Kenya Standard — Coffee — Sensory analysis — Vocabulary — specification, First Edition KS ISO 13301:2018 Kenya Standard — Sensory analysis — Methodology — General guidance for measuring odour, flavour and taste detection thresholds‘ by a three-alternative forced-choice (3-AFC) procedure, Second Edition KS ISO 5496:2006/Amd.1:201.8 Kenya Standard — Sensory analysis — Methodology — Initiation and training of assessors in the detection and recognition of odours AMENDMENT 1, First Edition KS ISO 734:2015 Kenya Standard — Oilseed meals —. Determination of oil content — Extraction method with hexane (or light petroleum) , First Edition KS ISO 5500:1986 Kenya Standard — Oilseed residues — Sampling, First Edition KS ISO 14244:2014 Kenya Standard — Oilseed meals — Determination of soluble proteins in potassium hydroxide solution, First Edition KS ISO 22630:2015 Kenya Standard — Oilseed meals — Determination of oil content — Rapid extraction method, First Edition KS ISO 7409:2018 Kenya Standard — Fertilizers — Marking — Presentation and declarations, Second Edition KS ISO 25475:2016 Kenya Standard — Fertilizers — Determination of ammoniacal nitrogen, First Edition KS ISO 18643:2016 Kenya Standard — Fertilizers and soil conditioners — Determination of biuret content of urea-based fertilizers — HPLC method, First Edition KS ISO 18644:2016 Kenya Standard — Fertilizers and soil conditioners — Controlled-release fertilizer — General requirements, First Edition KS ISO 18645:2016 Kenya Standard — Fertilizers and soil conditioners — Water soluble fertilizer — General requirements, First Edition KS ISO 25705:2016 Kenya Standard — Fertilizers — Determination of urea condensates using high-performance liquid chromatography (HPLC) — Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B), First Edition Textile and Leather KS 2662:2016 Amd 1:2019 Kenya Standard — Disposable adult diapers — Specification AMENDMENT I, First Edition KS 2857:2019 Kenya Standard — Cotton Industry — Code of practice, First Edition KS 2858:2019 Kenya Standard — Sisal Industry — Code of practice, First Edition KS 2174:2019 Kenya Standard — Measurement of physical properties of raw cotton by cotton classification instruments -- Standard test methods, Second Edition KS 2881:2019 Kenya Standard — Maternity pads — Specification, First Edition KS 1661:2019 Kenya Standard — Footwear — Canvas shoes — Specification, Second Edition KS ISO/TR 20880:2007 Kenya Standard Footwear — Performance requirements for `components for footwear — 0 utsol e, F irstEd ition KS 2238:2019 Kenya Standard — Baby shawl — Specification, Second Edition KS 559-1:2019 Kenya Standard — Men's and boy's trousers — Specification Part 1: Making up requirements, Third Edition KS 1267-2:2019 Kenya Standard — Pillows for domestic use — Specification Part 2: SynthetiC filled pillows, Third Edition KS 640-1:2019 Kenya Standard — Men's and boy's pyjamas — Specification Part 1: Making up requirements, Second Edition KS 640-2:2019 Standard — Men's and boy's pyjamas — Specification Part 2: Measurements, Second Edition KS 1037:2019 Kenya Standard — Woven bags — Test methods, Second Edition KS 629:2019 Kenya Standard — Sweaters — Specification, Fourth Edition KS ISO 18074:2015 Kenya Standard — Textiles — Identification of some animal fibres by DNA analysis method — Cashmere, wool, yak and their blends, First Edition KS ISO 18103:2015 Kenya Standard — Superfine woven wool fabric labelling — Requirements for Super S code definition, First Edition KS ISO 18254-1:2016 Kenya. Standard — Textiles — Method for the detection and determination of alkylphenol ethoxylates (APEO) Part 1: Method using. HPLC-MS, First Edition KS ISO 1130:1975 Kenya Standard — Textile fibres — Some methods of sampling for testing, First Edition KNWA 2884:2019 Kenya Standard — Non-woven polypropylene bags — Specification, First Edition Trade KS ISO/TS 12812-5:2017 Kenya Standard — Core banking — Mobile financial services Part 5: Mobile payments to businesses, First Edition Services KS ISO 29992:2018 Kenya Standard — Assessment of outcomes of learning services — Guidance, First Edition KS ISO 30401:2018 Kenya Standard -- Human resource management — Knowledge management systems — Requirements, First Edition KS ISO 30414:2018 Kenya Standard — Human resource management — Guidelines for internal and external human capital reporting, First Edition KS ISO 10668:2010 Kenya Standard — Brand valuation — Requirements for monetary brand valuation, First Edition KS 2875:2019 Kenya Standard — Human resource management — Learning and development — Guidelines,. First Edition KS 2876:2019 Kenya Standard — Human resource management — Valuing human capital — Requirements, First Edition KS 2277-1:2019 Kenya Standard — Schools and Colleges — Safety for design and technology Part 1: Health and safety management — Guidelines, Second Edition KS 2277-2:2019 Kenya Standard — Schools and Colleges — Safety for design and technology Part 2: Planning and services — Guidelines, Second Edition 9th August, 2019 THE KENYA GAZETTE 2895 KS 2277-3:2019 Kenya Standard — Schools and Colleges — Safety for design and technology Part 3: Teaching areas, equipment, tools and processes Part 3: Guidelines, Second Edition KS 2277-4:2019 Kenya Standard — Schools and Colleges — Safety for design and technology •Part 4.: Materials — Guidelines, Second Edition KS 2867:2019 Kenya Standard — Occupational safety and health -- Demolition of buildings — Code of practice, First Edition KS 2868:2019 Kenya Standard — Occupational safety and health — Sgwermen — Code of practice, First Edition KS ISO 45001:2018 Occupational health and safety management systems — Requirements with guidance for use, First Edition KS ISO 17776:2016 Kenya Standard — Petroleum and. natural gas industries — Offshore production installations -- Major accident hazard management during the design of new installations, First Edition KS ISO 13702:2015 Kenya Standard — Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines, First Edition 1.1 KS ISO 15544:2000 Kenya Standard — Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response, First Edition 1.2 KS ISO 15544:2000/Amd 1:2009 Kenya Standard — Petroleum and natural gas industries -- Offshore production installations — Requirements and guidelines for emergency response, First Edition KS ISO 13857:2008 Kenya Standard — Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs, First Edition KS ISO 10418:2019 Kenya Standard — Petroleum and natural gas industries — Offshore production installations — Process safety systems, First Edition KS ISO 13577-1:2016. Kenya Standard — Industrial furnaces and associated prOcessing equipment — Safety Part 1: General requirements, First Edition KS ISO 13577-2:2014 Kenya Standard — Industrial furnaces and associated processing equipment — Safety Part 2: Combustion and fuel handling systems, First Edition KS 1829:2019 Kenya Standard — Labelling of products — General requirements, Second Edition KS 2872:2019 Kenya Standard — Recreational watersport activities -- Responsible diving — requirements, Second Edition KS 2871:2019 Kenya Standard — Emergency management — Evacuation for healthcare facilities — Guidelines, Second Edition KS ISO 25649-1:2017 Kenya Standard — Floating leisure articles for use on and in the water — Part 1: Classifications, materials, general requirements and test methods, First Edition KS ISO 25649-3:2017 Kenya Standard — Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for class A, First Edition KS 2848:2019 Kenya . Standard — Moringa leaf products — Specification, First Edition KS 2849:2019 Kenya Standard — Production of moringa leaf products -- Code of practice, First Edition KS 2869:2019 Kenya Standard — Baobab fruit pulp powder — Specification, First Edition KS 2870:2019 Kenya Standard — Spirulina powder — Specification, First Edition KS ISO 18665:2015 Kenya Standard — Traditional Chinese medicine — Herbal decoction apparatus, First Edition Kenya Standard — Traditional Chinese Medicine — Determination of heavy metals in herbal medicines used in Traditional Chinese Medicine, First Edition KS ISO 19465:2017 Kenya Standard — Traditional Chinese medicine — Categories of traditional Chinese medicine (TCM) clinical terminological systems, First Edition KS ISO 18666:2015 Kenya Standard -- Traditional Chinese medicine — General requirements of moxibustion devides, First Edition KS ISO 17217-1:2014 Kenya Standard — Traditional Chinese medicine — Ginseng seeds and• seedlings Part 1: Panax ginseng C.A. Meyer, First Edition KS ISO 19824:2017 Kenya Standard -- Traditional Chinese medicine — Schisandra Chinensis (Turcz.) Baill. seeds and seedlings, First Edition KS ISO 20311:2017 Kenya Standard — Traditional Chinese medicine — Salvia miltiorrhiza seeds and seedlings, First Edition KS ISO 20408:2017 Kenya Standard — Traditional Chinese medicine — Panax notoginseng seeds and seedlings, First Edition KS ISO 20409:2017 Kenya Standard — Traditional Chinese medicine — Panax notoginseng root and rhizome, First Edition CODEX KS ISO 22000:2018 Kenya Standard — Food safety management systems — Requirements for any organization in the food chain, Second Edition EAC/COMESA KS 1054-1:2008 Cor 1:2019 Kenya Standard — Energy drinks — Specification Part 1: Ready-to-drink energy drinks CORRIGEDUM 1, First Edition The following standards are confirmed Electrotechnical KS •ISO/IEC 19788-1:2011 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources Part 1: Framework KS ISO/IEC 19788-5:2012 Kenya Standard -- Information technology — Learning, education and training — Metadata for learning resources Part 5: Educational elements KS ISO/IEC 24751-1:2008 Kenya Standard — Information technology — Individualized adaptability and accessibility in e-learning, education and training Part 1: Framework and reference model KS ISO/IEC 24751-2:2008 Kenya Standard — Information technology — Individualized adaptability and accessibility in e-learning, education and training Part 2: "Access for all" personal needs and preferences for digital delivery KS ISO/IEC 24751-3:2008 Kenya Standard — Information technology — Individualized adaptability and accessibility in e-learning, education and training Part 3: "Access for all" digital resource description KS ISO/IEC 19788-3:2011 Kenya Standard — Information processing systems — Vocabulary Part 3: Equipment technology KS ISO 18664:2015 KS ISO/IEC 19788-2:2011 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources Part 2: Dublin Core elements KS ISO/IEC 19788-5:2012 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources Part 5: Educational elements KS 1021:1989 Kenya Standard — Specification for general purpose steel wire strand KS 04-469-1:1984 Kenya Standard — Specification for high fidelity audio equipment and systems Part 1: General KS 04-469-5:1984 Kenya Standard — Specification for high fidelity audio equipment and systems Part 5: Microphones KS IEC 60320-1:2007 Kenya Standard — Kenya Standard — Appliances couplers for household and similar general purposes Part 1: General requirements KS IEC 60728-5:2007 Kenya Standard — Kenya Standard — Cable . networks for television signals, sound signals and interactive services Part 5: Headend equipment KS IEC 60799:1998 Kenya Standard — Electrical accessories — Cord sets and interconnection cord sets KS IEC 62116:2008 Kenya Standard — Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters KS IEC 62055-41:2007 Kenya Standard — Electricity metering — Payment systems Part 41: Standard transfer specification (STS) — Application layer protocol for one-way token carrier systems KS IEC 62056-61:2006 Kenya Standard — Electricity metering — Data exchange for meter reading, tariff and load control Part 61: Object identification system (OBIS) KS IEC 62056-62:2006 Kenya Standard — Electricity metering — Data exchange for meter reading, tariff and load control Part 62: Interface classes KS IEC 62056-53:2006: Kenya Standard — Electricity metering — Data exchange for meter reading, tariff and load control Part 53: COSEM application layer KS IEC 61400-11:2006 Kenya Standard — Wind turbines Part I1: • Acoustic noise measurement techniques KS IEC/TS 62257-9-5:2013 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-5: Selection of stand- alone lighting kits for rural electrification KS ISO 9806:2013 Kenya Standard — Solar energy — Solar thermal collectors — Test methods KS IEC 60034-1:2010 Kenya Standard — Rotating electrical machines Part 1: Rating and performance KS IEC 60034-4:2008 Kenya Standard = Rotating electrical machines Part 4: Methods for determining synchronous machine quantities from tests KS IEC 60904-2:2007 Kenya Standard — Photovoltaic devices Part 2: Requirements for reference solar devices KS IEC 61400-1:2005 Kenya Standard — Wind turbines Part 1: Design requirements KS IEC 61400-2:2006 Kenya Standard — Wind turbines Part 2: Design requirements for small wind turbines KS IEC 61400-12-1:2005 Kenya Standard — Wind turbines Part 12-I: Power performance measurements of electricity producing wind turbines KS IEC/TS 61400-13:2001 Kenya Standard — Wind turbine generator systems Part 13: Measurement of mechanical loads KS IEC/TS 61400-23:2001 Kenya Standard — Wind turbine generator systems Part 23.. Full-scale structural testing of rotor blades KS TEC 61400-25-1:2006 Kenya Standard — Wind turbines Part 25-1: Communications for monitoring and control of wind power plants — Overall description of principles and models KS IEC 61400-25-2:2006 Kenya Standard — Wind turbines Part 25-2: Communications for monitoring and control of wind power plants — Information models KS IEC 61400-25-3:2006 Kenya Standard — Wind turbines Part 25-3: Communications for monitoring and control of wind, power plants — Information exchange models KS IEC 61400-25-5:2006 Kenya Standard — Wind turbines Part 25-5: Communications for monitoring and control of wind power plants — Conformance testing KS IEC/TS 62257-1:2003 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 1: General introduction to rural elec trification KS IEC/TS 62257-2:2004 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range of electrification systems KS IEC/TS 62257-3:2004 Keny a Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 3: Project development and mar iagement KS IEC/TS 62257-4:2005 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 4: System selection and desig n KS IEC/TS 62257-5:2005 Kenya Standard Recommendations for small renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical hazards KS IEC/TS 62257-6:2005 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, maintenance and replacement IEC/TS 62257-9-2:2.006 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-2: Microgrids KS IEC/TS 62257 -9-3:2006 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-3: Integrated system — User interface KS IEC/TS 62.257-9-4:2006 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-4: Integrated system — User installation KS IEC/TS 62257-12-1:2007 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 12-1: Selection of self ballasted lamps (CFL) for rural electrification systems and recommendations for household lighting equipment KS IEC 62124:2004 Kenya Standard — Photovoltaic (PV) stand- alone systems — Design verification KS IEC 61400-4:2012 Kenya Standard — Wind turbines Part 4: Design requirements for wind turbine gearbOxes KS IEC/TS 62257-8-1:2007 Kenya Standard — Recommendations for small renewable energy and hybrid systems for 9th August, 2019 THE KENYA GAZETTE 2897 rural electrification Part 8-1: Selection of bktteries and battery management systems for stand-alone electrification systems — Specific case of automotive flooded lead-acid batteries available in' developing countries Kenya Standard -- Glossary of terms related to electrochemistry and electrometallurgy trade Part 1: General tests Kenya Standard — Intruder alarm systems in buildings — Specification Part I: Glossary of terms Kenya Standard — Intruder alarm systems in buildings — Specification Part 2: Symbols Kenya Standard — Intruder alarm systems in buildings — Specification Part 3: Systems installed in clients premises Kenya Standard — Intruder alarm systems in buildings — Specification Part 4: Central stations Kenya Standard — Intruder alarm systems in buildings — Specification Part 5: Detection devices for internal use Kenya Standard -- Intruder alarm systems in buildings — Specification Part 6: Wire-free systems installed in client's premises Kenya Standard — Intruder alarm systems in buildings — Specification Part 7: Alarm transmission systems Kenya' Standard — Automatic electrical fire alarm systems in buildings -- Specification Part 2: Heat-sensitive (point) detectors containing a static element Kenya Standard -- Automatic electrical fire alarm systems in buildings — Specification Part 3: Heat-sensitive detectors Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 4: Smoke-sensitive (Point-type) detectors Kenya Standard— Automatic electrical fire alarm systems in buildings — Specification Part 5: Self-Contained smoke detectors Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 6: Control and indicating equipment Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 7: Methods of test of sensitivity to fire Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 8: Components for automatic fire alarm systems for residential premises Kenya Standard — Filament lamps for road vehicles — Specification Kenya Standard — Flashlights — Specification Kenya Standard — Lamps for flashlights — Specification Kenya Standard — Code of practice for documentation for social alarm system Kenya Standard — Specification for multi- frequency tone signalling protocol for social alarm systems Kenya Standard — Electrical installation — Secondary batteries installed in buildings Kenya Standard — Methods of measuring the characteristics of disc playing record units KS 1590-1:2001 Kenya Standard — Siting of radio communications facilities — Specification Part 1: Low frequency, medium frequency and high frequency transmitting and high frequency receiving facilities KS 1590-2:2001 Kenya Standard — Siting of radio communications facilities — Specification Part 2: Guidelines for fixed, mobile and broadcasting services operating at frequency above 30 MHz KS 1590-3:2001 Kenya Standard Siting of radio communications facilities — Specification Part 3: Fixed location satellite earth stations KS 1629:2001 Kenya Standard — Methods of measuring the characteristics of reproducing equipment for digital audio compact discs KS 1671-12005 Kenya Standard — Domestic and similar electronic equipment interconnection requirements — Audiovisual link — Specification Part 1: General requirements KS 1671-2.1:2005 Kenya Standard — Domestic and similar electronic equipment interconnection requirements — Audiovisual link — Specification Part•2-1: Signal quality matching and automatic selection of source devices KS 1671-2.2:2005 Kenya Standard — Domestic and similar electronic equipment interconnection requirements — Audiovisual link — Specification Part 2-2: Basic system oriented commands KS 1671-2.3:2005 Kenya Standard — Domestic and similar electronic equipment interconnection requirements — Audiovisual link — Specification Part 2-3: System oriented application KS IEC 62002-1:2008 Kenya Standard — Mobile and portable DVB- T/1-1 radio access Part 1: Interface specification KS IEC 62002-2:2008 Kenya Standard — Mobile and portable DVB- T/H radio access Part 2: Interface conformance testing KS IEC/TR 62002-3:2008 Kenya Standard — Mobile and portable DVB-T/H radio access Part 3: Measurement Interface KS IEC/TR 62002-4:2009 Kenya Standard — Mobile and portable DVB-T/H radio access Part 4: Measurement methods for total radiated sensitivity in hand- held broadcast terminals KS 239:1996 Kenya Standard — Specification for safety requirements for' domestic and similar electrical appliances KS 1111-10:1993 Kenya Standard — Specification for household and similar electrical appliances Part 10: Particular requirements for appliances for skin and hair care KS 1111-9:1993 Kenya Standard — Specification for safety requirements for household electrical appliances Part 9: Requirements for a.c. electric shavers, hair clippers and similar appliances KS 1111-5:1991 Kenya Standard — Specification for safety requirements for household electrical appliances Part 5: Particular requirements for battery powered shavers, hair clippers and similar appliances and their charging and battery assemblies KS 1111-11:1995 Kenya Standard — Specification for household and similar electrical appliances Part 11 Particular requirements for electrical clocks KS 41-1:1977 - KS 111-1:199E KS 111-2:1998 KS 111-3:1998 KS 111-4:1985 KS 111-5:1998 KS 111-6:1998 KS 111-7:1998 KS 186-2:1993 KS 186-3:1980 KS 186-4:1980 KS 186-5:1998 KS 186-6:1980 KS 186-7:1985 KS 186-8:1982 KS 500:1982 KS 1386:1999 KS 1450:1999 KS 1723:2001 KS 1724:2001, KS 1861:2005 KS 600:1985 Kenya Standard — Specification for household electrical appliances Part 20: Particular Requirements for electric kitchen machines Kenya Standard — Specification for household electrical appliances Part 22: Particular Requirements for electric fans and regulators Kenya Standard - Specification for safety requirements for household and similar electrical appliances Part 8: Particular requirements for frying pans, deep fat fryers and similar appliances Kenya Standard — Safety of household and similar electrical appliances Part 31: Particular requirements for commercial electric grillers and toasters Kenya Standard — Safety of household and similar electrical appliances Part 26: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Kenya Standard — Safety of household and similar electrical appliances Part 39: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems Kenya Standard — Safety of household and similar electrical appliances Part 42: Particular requirements for pedestrian-controlled mains- operated lawn scarifiers and aerators. Kenya Standard — Specification for household and similar electrical appliances Part 12: Particular requirements for sewing machines Kenya Standard — Specification for household and similar electrical appliances Part 17 Particular requirements for commercial electric griddles and griddle grills Kenya Standard — SpecificatiOn for household and similar electrical appliances Part 19: Particular Requirements for commercial electric forced convection ovens Kenya Standard — Specification for household and similar electrical appliances Part 19: Particular Requirements for commercial electric forced convection ovens Kenya Standard — Specification for household and similar electrical appliances Part 13: Particular requirements for room heaters Kenya Standard — Specification for safety requirements for household electrical appliances - Part 3: Particular requirements for dishwashers Kenya Standard — Specification for safety requirements for household electrical appliances Part 4: Particular requirements for washing machines Kenya Standard — Specification for safety requirements for domestic and similar electrical appliances Part 7: Particular requirements for tumbler dryers Kenya Standard — Specification for household and similar electrical appliances Part 15: Particular requirements for commercial electric ranges, ovens and hob elements Kenya Standard — Specification for household and similar electrical appliances Part 18: Particular requirements for commercial electric multi-purpose cooking pans Kenya Standard — Specification for household and similar electrical appliances Part 2: Particular requirements for coffee mills and coffee grinders Kenya Standard — Specification for safety of hc.usehold and similar electrical appliances Part 1: Particular requirements for micrm wave ovens Kenya Standard — Specification for safety requirements for household a nd similar electrical appliances Part 6: Particular requirements for toasters, grills, roasters and similar appliances Kenya Standard — Safety of ho usehold and similar electrical appliances Part 2:3: Particular requirements for instantaneous watt ,r heaters Kenya Standard — Safety of household and similar electrical appliances Part 24: Particular requirements for spin extractors Kenya Standard = Safety of household and similar electrical appliances Part 2.5: Particular requirements for refrigerating appliances, ice- cream appliances and ice-makers Kenya Standard — Safety of household and similar electrical appliances Part 26: Particular requirements for ranges hoods Kenya Standard — Safety of household and similar electrical appliances Part 27: Particular requirements for appliances for heating liquids Kenya Standard — Safety of household and similar electrical appliances Part 30: Particular requirements for commercial electric boiling pans Kenya Standard — Safety of household and similar electrical appliances Part 32: Particular requirements for commercial electric hot cupboards Kenya Standard — Safety of household and similar electrical appliances Pan. 33: Particular requirements for sauna heating appliances Kenya Standard — Safety of household and similar electrical appliances Part 34: Particular requirements for projectors and similar • appliances Kenya Standard — Safety of household ant I similar electrical appliances Part 35: Particular requirements for insect killers Kenya Standard — Safety of household and similar electrical appliances Part 36: Particular requirements for floor-treatment and floor- cleaning machines, for industrial and commercial use Kenya Standard — Safety of household and similar electrical appliances Part 37: Particular requirements for portable imt nersion heaters Kenya Standard — Safety of household and similar electrical appliances Part 38: Particular requirements for fabfic steamers Kenya Standard — Safety of household and similar electrical appliances; Part 40: Particular requirements for commercial microwave ovens Kenya Standard — Safety of household and similar electrical appliances; Part 41: Particular requirements for walk-behiind and hand-held lawn trimmers and lawn edge trimmers Kenya Standard — Safety of household and similar electrical appliances Part 43: Particular requirements for scissors type grass shears Kenya Standard — Safety of household ar rd similar electrical appliances Part 44: Particu jar requirements for drives for vertically mov ing garage doors for residential use KS 1111-20:1997 KS 1111-22:1997 KS 1111-8:1993 KS 1111-31:2005 KS 1111-26:2005 KS 1111-39:2005 KS 1111-42:2005 KS 1111-12:1993 KS 1111-17:1998 KS 1111-19:1998 KS 1111-19:1998 KS 1111-13:1993 KS 1111-3:1994 KS 1111-4:1993 KS 1111-7:1997 KS 1111-15:1993 KS 1111-18:1991 KS 1111-14:1993 KS 1111-1:2000 KS 1111-6:2000 KS 1111-23:2002 KS 1111-24:2005 KS 1111-25:2005 KS 1111-28:2005 KS 1111-27:2:005 KS 1111-30:2005 KS 1111-32:2005 KS '1111-33:2005 KS 11 11-34:2005 KS 11 11-35:2005 KS 1 111-36:2005 KS 1111-37:2005 K'S 1111-38:2005 K S 1111-40:2005 K'S 1111-41:2005 KS 1111-43:2005 KS 1111-44:2005 9th August, 2019 THE KENYA GAZETTE • 2899 KS 1111-45:2005 Kenya Standard — Safety of household and similar electrical appliances Part 45: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment KS 1111-46:2005 Kenya Standard — Safety of household and similar electrical appliances Part 46: Particular requirements for humidifiers KS OIML R 47:1979 Kenya Standard — Standard weights for testing of high capacity weighing machines KS OIML R 66:1985 Kenya Standard — Length measuring instruments KS OIML R 111-1:2004 Kenya Standard — Weights of Classes El, E2, F1, F2, M 1 , M1-2, M2, M2-3 and M3 Part 1: Metrological and technical requirements KS OIML R i 11-2:2004 Kenya Standard — Weights of Classes El, E2, Fl, F2, M1, M1-2, M2, M2-3 and M3 Part 2: Test report format ' KS OIML R 92:1989 Kenya Standard Wood-moisture meters — Verification methods and equipment: General provisions KS OIML R133:2002 Kenya Standard Liquid-in-glass thermometers KS OIML R 23:1975 Kenya Standard — Tyre pressure gauges for motor vehicles KS OIML R 52:2004 Kenya Standard — Hexagonal weights Metrological and technical requirements KS OIML R 55:1981 Kenya Standard — Speedometers, mechanical odometers and chronotachographs for motor vehicles — Metrological regulations KS OIML R 88:1998 Kenya Standard — Integrating-averaging sound level meters KS OIML R 91:1990 Kenya Standard — Radar equipment for the measurement of the speed of vehicles KS OIML R 130:2001 Kenya Standard — Octave-band and one-third- octave-band filters KS OIML R 102:1992 Kenya Standard — Sound calibrators KS OIML R 44:1985 Kenya Standard — Alcoholometers and alcohol hydrometers and thermometers for tiw in alcoholometry KS OIML R 69:1985 Kenya Standard — Glass capillary viscometers for the measurement of kinematic viscosity — Verification method KS ISO 13752:1998 Kenya Standard — Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference KS ISO 14956:2002 Kenya Standard — Air quality — Evalluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty KS ISO 16362:2005 Kenya Standard — Ambient air — Determination of particle phase polycyclic aromatic hydrocarbons by high performance liquid chromatography KS ISO 12884:2000 Kenya Standard — Ambient air — Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons --- Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses KS ISO 13794:1999 Kenya Standard — Ambient air --- Determination of asbestos fibres — Indirect transfer transmission electron microscopy method KS ISO 10498:2004 Kenya Standard — Ambient air — Determination of sulfur dioxide -- Ultraviolet fluorescence method. KS ISO 11222:2002 Kenya Standard — Stationary Source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications KS ISO 20988:2007 Kenya Standard — Air quality — Guidelines for estimating measurement uncertainty KS ISO 16107:2007 Kenya Standard — Workplace atmospheres Protocol for evaluating the performance of diffusive samplers KS ISO 16000-1:2004 Kenya Standard — Indoor air Part 1: General aspects of sampling strategy KS ISO 16000-5:2007 Kenya Standard -- Indoor air Part 5: Sampling strategy for volatile organic compounds (VOCs) KS ISO 7168-2:1999 Kenya Standard — Air quality — Exchange of data Part 2: Condensed data forma Kenya Standard — Air quality — Emissions to the air by cement factories guidelines KS ISO 21438-2:2009 Kenya Standard — Workplace atmospheres — Determination of inorganic acids by ion chromatography Part Volatile acids, except hydrofluoric acid (hydrochloric acid, hydro bromic acid and nitric acid) KS ISO 16000-17:2008 Kenya Standard — Indoor air Part 17: Detection and enumeration of moulds-Culture- based method KS EAS 750:2010 KS EAS 751:2010 KS EAS 752:2010 KS ISO 21438-3:2010 KS ISO 9486:1991 KS ISO 9487:1991 KS ISO 4219:1979 'KS ISO 8756:1994 KS ISO 8672:1999 KS ISO 8760:1990 KS ISO 8518:2001 KS ISO 10313:1993 Kenya Standard — Air quality — Specification Kenya Standard — Air quality — Tolerance limits of emissions discharged to the air by fact Kenya Standard — Workplace atmospheres — Determination of inorganic acids by ion chromatography Part 3: Hydrofluoric acid and particulate fluorides Kenya Standard — Workplace air — Determination , of vaporous chlorinated hydrocarbons — Charcoal tube / solvent desorption / gas chromatographic method Kenya Standard — ,Workplace air — Determination of vaporous aromatic hydrocarbons — Charcoal tube / solvent desorption / gas chromatographic method Kenya Standard — Air quality — Determination of gaseous Sulphur compounds in ambient air — Sampling equipment Kenya Standard — Air quality — Handling of temperature, pressure and humidity data Kenya Standard — Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy -- Membrane filter method Kenya Standard — Workplace air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication Kenya Standard — Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method Kenya Standard — Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method KS ISO 10155:1995 Kenya Standard — Stationary Source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications • KS ISO 10397:1993 Kenya Standard — Stationary Source emissions — Determination of asbestos plant emissions — Method by fibre count measurement KS ISO 4224:2000 Kenya Standard — Ambient air — Determination of carbon monoxide - Non- dispersive infrared spectrometry method KS ISO 7708:1995 Kenya Standard — Air quality — Partied size fraction definitions for health-related sampling KS ISO 6767:1990 Kenya Standard — Ambient air — Determination of the mass concentration of Sulfur dioxide — tetrachloromercurate (TCM) / pararosaniline method KS ISO 7996:1985 Kenya Standard — Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method KS ISO 8186:1989 Kenya Standard — Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method KS ISO 10312:1995 Kenya Standard — Ambient air — Determination of asbestos fibres — Direct7 transfer transmission electron microscopy method KS ISO 10473:2000 Kenya Standard — Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method KS ISO 13964:1998 Kenya Standard -- Determination of ozone in ambient air — Ultraviolet photometric method KS ISO 16000-2:2004 Kenya Standard — Indoor air Part. 2: Sampling strategy for formaldehyde KS ISO 15713:2006 Kenya Standard — Stationary source emissions — Sampling and determination of gaseous fluoride content KS ISO 16017-1:2000 Kenya Standard — Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography Part 1: Pumped sampling KS ISO 16017-2:2003 Kenya Standard — Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube / thermal desorption / . capillary gas chromatography Part 2: Diffusive sampling • KS ISO 16000-4:2004 Kenya Standard — Indoor air Part 4: Determination of formaldehyde — Diffusive sampling meth KS ISO 16000-6:2004 Kenya Standard — Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax Tar sorbent, thermal desorption and gas KS ISO 16000-9:2006 Kenya Standard — Indoor air Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method KS ISO 16000-8:2007 Kenya Standard — Indoor air Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions. KS ISO 16000-10:2006Kenya Standard — Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method KS ISO 16000-11:2006 Kenya Standard — Indoor air Part 11: Determination of the emission of volatile organic compounds from building products and furnishing-- Sampling, storage of samples and preparation of test specimens KS ISO 11222:2002 Kenya Standard Air • quality — Determination of the uncertainty of the time average of air quality measurements KS ISO 20988:2007 Kenya Standard — Air quality — Guidelines for estimating measurement uncertainty KS ISO 14956:2002 Kenya Standard — Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty KS ISO 16362:2005 Kenya Standard — Ambient air Determination of particlephase polycyclic aromatic hydrocarbons by high performance liquid chromatography. KS ISO 12884:2000 Kenya Standard — Ambient air — Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons= Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses KS ISO 13794:1999 Kenya Standard — Ambient air — Determination of asbestos fibres — Indirect transfer transmission electron microscopy method KS ISO 17734-2:2006 Kenya Standard — Determination of organ nitrogen compounds in air using liquid chromatography and mass spectrometry Part 2: Amines and amino isocyanates using tributylamine and ethyl chloroform ate derivatives KS ISO 10498:2004 Kenya Standard — Ambient air — Determination of sulfur dioxide — Ultraviolet fluorescence method KS ISO 20552:2007 Kenya Standard — Workplace air — Determination of mercury vapour — Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry KS ISO 16622:2002 Kenya Standard — Meteorology — Sonic anemometers/thermometers — Acceptance test methods for mean wind measurements KS ISO 14965:2000 Kenya Standard — Air quality — Determination of total non-methane organic compounds — Cryogenic preconcentration and direct flame ionization detection method KS ISO 14966:2002 Kenya Standard — Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method KS ISO 16200-2:2000 Kenya Standard — Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 2: Diffusive sampling method KS ISO 16702:2007 Kenya Standard — Workplace air quality — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography KS ISO 15767:2003 Kenya Standard — Workplace atmospheres — Controlling and characterizing errors in weighing collected aerosols KS ISO 16740:2005 Kenya Standard — • Workplace air — Determination of hexavalent chromium in airborne particulate matter — Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide 9th August, 2019 THE KENYA GAZETTE 2901 KS ISO 17734-1:2006 Kenya Standard — Determination of organ nitrogen compounds in air using liquid chromatography and mass spectrometry Part 1: Isocyanates using tributylamine derivatives. KS ISO 16200-1:2001 Kenya Standard — Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 1: Pumped sampling method KS ISO 14164:1999 Kenya Standard — Stationary source emissions — Determination of the volume flowrate of gas streams in ducts -- Automated method KS ISO 15202-1:2C 10 Kenya Standard — Workplace air --- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 1: Sampling KS ISO 15202-2:2001 Kenya Standard — Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation KS ISO 15202-3:2004 Kenya Standard — Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 3: Anal KS ISO 12039:2001 Kenya Standard — Stationary source emissions — Determination of carbon monoxide, carbon dioxide and oxygen — Performance characteristics and calibration of automated measuring systems KS ISO 11632:1998 Kenya Standard — Stationary source emissions — Determination of mass concentration of sulfur dioxide - Ion chromatography method KS ISO 11174:1996 Kenya Standard — Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method KS ISO 11041:1996 Kenya Standard — Workplace air — Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour — 4. Method by hydride generation and atomic absorption, spectrometry KS ISO 11338-2:2003 Kenya Standard — Stationary source emissions — Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 2: Sample preparation, clean-up and determination KS ISO 11338-1:2003 Kenya Standard — Stationary source emissions — Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling KS ISO 12141:2602 Kenya Standard — Stationary source emissions — Determination of mass 'concentration of particulate matter (dust) at low concentrations — Manual gravimetric method KS ISO 10780:1994 Kenya Standard — Stationary Source emissions — Measurement of velocity and volume flowrate of gas streams in ducts KS ISO 11564:1998 Kenya Standard — Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Naphthylethylenediamine photometric method KS 2495-1:2013 Kenya Standard — Pressure sensitive adhesive tapes With plastic base — Specification Part I: Plasticized PVC adhesive tapes KS 510:1985 Kenya Standard — Methods of test for adhesives KS 1273:1995 Kenya Standard — Specification for unsaturated polyester resin for body fillers KS 1530:1999 Kenya Standard -- Specifications for adhesives for use with ceramic tiles. KS ISO 4586-1:1999 Kenya Standard — High pressure decorative laminates sheets made from thermosetting resins Part 1: Classification and specifications KS ISO 4586-2:1999 Kenya Standard — High pressure decorative laminates ,s,heets made from thermosetting resins Part 2: Determination of properties KS 1522-1:1999 Kenya Standard — Specification for rubber- based adhesives for tyres and tubes Part I : Non- curing KS 1518:1999 Kenya Standard — Specification for sunflower oil based long oil alkyd resin KS 1520:1999 Kenya Standard — Specification for safflower oil based long oil alkyd resin KS 1519:1999 Kenya Standard.— SpecificatiOn for soya bean oil based long oil alkyd resin KS 2495-4:2013 Kenya Standard — Pressure sensitive adhesive tapes with plastic base — Specification part 4: cellulose adhesive tape KS 2495-5:2013 Kenya Standard — Pressure sensitive adhesive tapes with plastic base — Specification Part 5: Unplasticized PVC adhesive tapes KS 2167-5:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 5: Determination of shrinkage grouts KS 2496:2013 Kenya Standard — Methods of sampling and test for pressure sensitive adhesive tapes KS 2167-10:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 10: Determination of wetting capability for adhesives KS 2167-11:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 11: Determination of tensile adhesion strength for cementitious adhesives kS 2167-7:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 7: Concrete slab for test KS 2167-8:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 8: Determination of slip for adhesives KS 2167-3:2008 Kenya Standard. Adhesives and grout for tiles — Test methods Part 3: Determination of resistance to abrasion for grouts KS 2167-2:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 2: Determination of chemical resistance of reaction resin mortars KS 2167-1:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 1: Determination of transverse deformation for cementitious adhesives and grouts KS 2167-9:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 9: Determination of shear adhesion strength of dispersion adhesives KS 2495-3:2013 Kenya Standard — Pressure sensitive adhesive tapes with plastic base — Specification Part 3: Polyethylene adhesive tapes KS 2495-2:2013 Kenya Standard — Pressure sensitive adhesive tapes with plastic base — Specification Part 2: Polyester adhesive tapes KS 1290-4:2007 Kenya Standard — Chemical used for treatment of water intended for human consumption Part 4: Calcium hypochlorite Kenya Standard — Chemical used for treatment of water intended for human consumption Part 4: Calcium hypochlorite Kenya Standard — Specification for bleaching agents Part 3: Chlorinated lime bleaching powder for water treatment Kenya Standard — Chemicals used for treatment of water intended for human consumption — Aluminium sulphate — Specification Kenya Standard — Liquid soap — Specification Kenya Standard — Determination of the microbial inhibition of cosmetic soap bars and liquid hand and body washes — Test method Kenya Standard — Specification for bleaching agents Part 1: Sodium hypochlorite solutions Kenya Standard — Glossary of terms relating to surface active agents Kenya Standard — Glossary of terms relating to disinfectants Kenya Standard — Water for analytical laboratory use — Specification and test methods Kenya Standard — Soaps — Determination of moisture and volatile matter content — Oven method Kenya Standard — Surface active agents — Simplified classification Kenya Standard — Washing powders Determination of active oxygen content Titrimetric method Kenya Standard — Analysis of soaps Determination of unsaponifiable, unsaponified and unsaponified saponifiable matter Kenya Standard — Surface active agents — Preparation of water with known calcium hardness Kenya Standard — Surface active agents — Detergents for hand dishwashing — Guide for comparative testing of performance Kenya Standard — Synthetic organic liquid detergent for household use — Specification Kenya Standard — Oven cleaner and grease remover — Specification Kenya Standard — Carpet and upholstery shampoo -- Specification Kenya Standard — Water quality — Determination of the chemical oxygen demand index (ST-COD) — Small-scale sealed-tube method Kenya Standard — Antibacterial toilet soap — Specification Part 1: Solid Kenya Standard — Antibacterial toilet soap — Specification Part 2: Liquid Kenya Standard — Instant hand sanitizers — Specification Kenya Standard — Chemicals used for treatment of water intended for human consumption — Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulphate — Specification Kenya Standard — Acidic detergents for 'cleaning -in-place' in food and beverage industry — Specification Kenya Standard — Heavy-duty alkaline detergents for 'cleaning-in-place' in food and beverage industry — Specification Kenya Standard — Application of liquid polyaluminium-based coagulants in potable water treatment — Guidelines Kenya Standard — Chemicals used for treatment of water intended for human consumption Chlorine dioxide — Specification Kenya Standard — Chemicals used for treatment of water intended for human consumption — Liquefied chlorine gas — Specification Kenya Standard — Products used for treatment of water intended for human consumption — Bone charcoal Kenya Standard — Swimming pools water — Quality tolerances Kenya Standard — Soap starch — Specification Kenya Standard — Soaps — Determination of content of ethanol-insoluble matter 'Kenya Standard — Surface active agents — Analysis of soaps — Determination of free caustic alkali KS 1290-2:1998 KS 1290-3:1998 KS 85:2007 KS EAS 790:2013 KS EAS 794:2013 KS 1290-1:1999 KS 1425:1997 KS 928:2003 KS ISO 3696:1987 KS ISO 672:1978 KS ISO 2131:1972 KS ISO 4321:1977 KS ISO 1067:1974 KS ISO 2174:1990 KS ISO 4198:1984 KS EAS 383:2013 KS EAS 791:2013 KS EAS 792:2013 KS ISO 15705:2002 KS EAS 766-1:2013 KS EAS 766-2: 2013 KS EAS 789:2013 KS 1924:2007 !,-,,KS 2117:2013 fl.. KS 2119:2013 KS 1923:2007 KS 2159:2008 KS 2158:2008 KS 2161:2008 KS 2407:2012 KS 2408:2012 KS EAS 486:2008 KS EAS 488:2008 KS EAS 186:2013 Kenya Standard — Toilet soap — Specification KS EAS 770: 2012 Kenya Standard — Fortified sugar — Specification KS EAS 348:2004 Kenya Standard— Glossary of terms used in confectionery trade KS EAS 349:2004 Kenya Standard — Glucose syrup — Specification KS 2617.2008 Kenya Standard -- Molasses for industrial use — Specification KS EAS 5:2009 Kenya Standard — Refined white sugar — Specification KS EAS 749:2014 Kenya Standard — Brown sugars — Specification KS 1792-2:2013 Kenya Standard — Maobased cocoa products — Specification Part I: Granulated products KS ISO/TR 12591:2013 Kenya Standa.rd — White tea — Specification KS 2065:2007 Kenya Standard — Field beans seed — Specification KS 790:2007 Kenya Standard — Glossary of terms for seed — Specification KS 692:2008 Kenya Standard — Seeds for solanaceous vegetable crops — Specification KS 691:2007 Kenya Standard — Seeds for cucurbit vegetables — Specification KS 1312:2007 Kenya Standard — Sugarcane vegetative planting materials KS ISO 4112:1990 Kenya Standard -- Cereals and pulses — Guidance on measurement of the temperature of grains stored in bulk KS 42-2:2008 Kenya Standard — Cereals and pulses Part 2: Determination of the mass of 1000 grains KS EAS '762:2013 Kenya Standard — Dry soy beans — Specification KS ISO 13300-1:2006 Kenya Standard — General guidance for the staff of a sensory evaluation laboratory Part 1: Staff responsibilities 9th August, 2019 THE KENYA GAZETTE 2903 KS ISO 13300-2:2006 Kenya Standard — Sensory analysis — General guidance for the staff of a sensory evaluation laboratory Part 2: Recruitment and training of panel leaders KS ISO 4121:2003 Kenya Standard — Sensory analysis Guidelines for the use of quantitative response scales. KS ISO 11132:2012 Kenya Standard — Sensory analysis — Methodology — Guidelines for monitoring the performance of a quantitative sensory panel KS ISO 14183 COR 2010 Kenya Standard — Animal feeding stuffs — Determination of monensin, narasin and salinornycin contents — Liquid chromatographic method using post-column derivatization KS ISO 13914:2004 Kenya Standard — Animal feeding stuffs — Enzymatic determination of total starch content KS ISO 6498:2012 Kenya Standard — Animal feeding stuffs — Guidelines for samples preparation KS ISO 7932:1993 Kenya Standard — Methods for the microbiological examination of food and animal feeding stuffs, — Enumeration of Bacillus Cereus KS ISO 8914:1998 Kenya Standard -- Methods for the microbiological examination of food and animal feeding stuffs --- Detection of Virbrio Parahaemolyticus KS ISO/TS 17764-2:2002 Kenya Standard — Animal feeding stuffs — Determination of the content of fatty acids Part 2: Gas chromatographic method KS ISO 7088:1981 Kenya Standard — Fish meal — Vocabulary KS EAS 230: 2001 Kenya Standard — Maize bran as livestock feed — Specification ' KS ISO 10273:2003 Kenya Standard -- Microbiology of food and animal feeding stuffs -- Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica KS ISO 15213:2003 Kenya Standard — Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions KS ISO 16050:2003 Kenya Standard — Foodstuffs — Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, GI and G2 in cereals, nuts and derived products — High-performance liquid chromatographic method KS 949:1999 Kenya Standard — Specification for rice bran KS EAS 97:1999 Kenya Standard — Fishmeal — Specification KS 1051:1997 Kenya Standard — Guide on the maximum limits of pesticides residues KS COD STAN 229:1999 Kenya Standard — Recommended methods of analysis for pesticide residues KS CAC/GL 33:1999 Kenya Standard — Methods of sampling for the determination of pesticide residues for compliance with MRLs KS ISO 8398:1989 Kenya Standard — Solid fertilizers — Measurement of static angle of repose KS ISO 7742:1988 Kenya Standard — Solid fertilizers Reduction of samples KS ISO 8397:1988 Kenya Standard — Solid fertilizers and soil conditioners —.Test sieving. KS ISO 8634:1991 Kenya Standard — Solid fertilizers — Sampling plan for the evaluation of a large delivery KS ISO 10248:1996 Kenya Standard — Fluid fertilizers — De- aeration of suspension samples by film disentrainment KS ISO 8398:1989 Kenya Standard — Solid fertilizers Measurement of static angle of repose KS ISO 7742:1988 Kenya Standard — Solid fertilizers Reduction of samples KS ISO 8397:1988 Kenya Standard — Solid fertilizers and soil conditioners — Test sieving KS ISO TR 5307:1991 Kenya Standard — Solid fertilizers — Sampling plan for the evaluation of a large delivery KS ISO 10248:1996 Kenya Standard — Fluid fertilizers — De- aeration of suspension samples by film disentrainment KS ISO 6579 AMD1:2007 Kenya Standard — Recommended methods of analysis for pesticide residues KSIS017372AMD1:2010 Kenya Standard — Methods of sampling for the determination of pesticide residues for compliance with MRLs KS ISO 4833:2003 Kenya Standard — Guide on the maximum limits of pesticides residues KS ISO 1838:1999 Kenya Standard — Specification for fresh pineapples — Guide to storage and transport KS ISO 2169:1999 Kenya Standard — Fruits and vegetables — Physical conditions in cold stores — Definitions and measurements KS COD STAN 188:1993 Kenya Standard — Baby corn KS ISO 6662:1983 Kenya Standard — Plums — Guide to cold storage. KS COD STAN 202:1995 Kenya Standard — Kenya Codex standards for couscous KS COD STAN 143:1985 Kenya Standard — Kenya Codex standards for dates KS EAS 330:2002 Kenya Standard — Citrus fruit — Specification KS EAS 332:2002 Kenya Standard — Fresh capsicums Specification KS EAS 47:2000 Kenya Standard — Fresh papaya Specification. KS EAS 56:2000 Kenya Standard — Fresh mushrooms Specification KS EAS 286-1:2002 Kenya Standard — Cut flowers and cutfoliage Part 1: Fresh cut flowers — Specification. KS 1047:1997 Kenya Standard — Specification for apples and pears KS 1484:1999 Kenya Standard — Specification for asparagus KS ISO 1212:1995 Kenya Standard — Specification for apples - Cold storage KS ISO 6659:1981 Kenya Standard — Sweet pepper — Guide to refrigerated storage and transport KS ISO 2168:1974 Kenya Standard — Table grapes — Guide to cold storage KS ISO 4874:2000 Kenya Standard — Tobacco --- Sampling of batches of raw material — General principles KS ISO 8243:2003 Kenya Standard — Cigarettes — Sampling KS 457-2:1995 Kenya Standard — Methods of test for tobacco and tobacco products Part 2: Determination of nicotine, tar, density and burning quality KS ISO 15154:2003 Kenya Standard — Tobacco — Determination of the content of reducing carbohydrates — Continuous-flow analysis method KS ISO 15517:2003 Kenya Standard — Tobacco — Determination of the nitrate content — Continuous-flow analysis method KS ISO 6565:2002 Kenya Standard — Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement KS ISO 11454:1997 Kenya Standard — Tobacco and tobacco products — Determination of vapour-phase nicotine in air — Gas-chromatographic method KS ISO 12195:1995 Kenya Standard — Threshed tobacco -- Determination of residue stem content KS ISO 13276:1997 Kenya Standard — Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid KS ISO 3402:1999 Kenya Standard — Tobacco and tobacco products — Atmosphere for conditioning and testing KS ISO 16055:2003 Kenya Standard — Tobacco and tobacco products — Monitor test piece — Requirements and use KS ISO 15153:2003 Kenya Standard -- Tobacco — Determination of the content of reducing substances -- Continuous-flow analysis method KS ISO 6488-1:1997 Kenya Standard — Tobacco — Determination of water content Part 1: Karl Fischer method ISO 16632:2003 Kenya Standard — Tobacco and tobacco products — Determination of water content — Gas-chromatographic method KS ISO 2881:1992 Kenya Standard — Tobacco and tobacco * products — Determination of alkaloid content — Spectrometric method KS ISO 4876:1980 Kenya Standard — Tobacco and tobacco products — Determination of maleic hydrazide residues KS ISO 2817:1999 Kenya Standard — Tobacco and tobacco products-- Determination of silicated residues insoluble in hydrochloric acid KS ISO 6466:1983 Kenya Standard — Tobacco and tobacco products — Determination of dithiocarbamate pesticides residues — Molecular absorption spectrometric method KS ISO 4389:2000 Kenya Standard — Tobacco and tobacco products — Determination of organochlorine pesticide residues — Gas-chromatographic method KS EAS 92-4:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 4: Determination of moisture in tobacco KS EAS 92-7:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 7: Determination of burning quality for cigarettes KS EAS 92-9:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 9: Determination of mass loss on heating KS EAS 92-5:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 5: Determination of loose shorts in packets KS EAS 92-6:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 6: Determination of potash in tobacco flame photometric method KS EAS 92-8:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 8: Determination of loss of tobacco from the ends Rotating cylindrical cage method KS EAS 92-3:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 3: Determination of water in smoke total particulate matter by Karl Fischer titrimetric KS EAS 92-2:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 2: Determination of total particulate matter (tar) in cigarette smoke using the Filtrona 302 smoking machine KS EAS 92-17:2008 Kenya Standard — Methods of test for tobacco and tobacco products Part 17: Cigarettes — Sampling KS 51:2013 Kenya Standard — Ammonium sulphate nitrate (ASN) fertilizer — Specification KS 47:2013 Kenya Standard — Calcium ammonium nitrate (CAN) fertilizer — Specification KS 288:2013 Kenya Standard — Urea fertilizer grade — Specification KS 350:2013 Kenya Standard — Potassium chloride (muriate of potash) fertilizer — Specification KS 351:2013 Kenya Standard — Potassium sulphate (sulphate of potash) fertilizer — Specification KS EAS 456:2007 Kenya Standard — Organic products =— Specification Services KS ISO 15535:2012 Kenya Standard — General requirements for establishing anthropometric databases KS ISO 639-4:2010 Kenya Standard — Codes for representation of name of languages Part 4: general principles of coding of name of languages and related entities, and application guidelines KS ISO 6422-1:2010 Kenya Standard — Layout key for trade documents Part 1: Paper-based documents KS ISO 15706-2:2007 Kenya Standard — Information and documentation — International Standard Audio- visual Number (ISAN) Part 2: Version identifier KS ISO 639-3:2007 Kenya Standard — Code for representation of names of languages Part 3: Alpha -3 code for comprehensive coverage of languages KS ISO 10075-3:2004 Kenya Standard — Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and assessing mental workload. KS ISO 7730:2005 Kenya Standard — Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria KS ISO 11228-1:2003 Kenya Standard — Ergonomics — Manual handling Part 1: Lifting and carrying KS ISO 17724:2003 Kenya Standard — Graphical symbols — Vocabulary KS ISO 15534-1:2000 Kenya Standard — Ergonomic design for the safety of machinery Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery KS ISO 15534-2:2000 Kenya Standard — Ergonomic design for the safety of machinery Part 2: Principles for determining the dimensions required for access openings KS ISO 9355-2:1999 Kenya Standard — Ergonomic requirements for the design of displays and control actuators Part 2: Displays. KS ISO 11428:1996 Kenya Standard — Ergonomics — Visual danger signals — General requirements, design and testing 9th August, 2019 THE KENYA GAZETTE 2905 KS ISO 10075-2:1996 Kenya Standard — Ergonomic principles related to mental workload Part 2: Design principles KS ISO 639- 6:2009 Kenya Standard Code for representation of names of languages Part 6: Alpha- 4 code for comprehensive coverage of language variants KS ISO/TS20282-2:2013 Kenya Standard — Usability of consumer products and products for public use Part 2: Sununative test methods KS 2391:2013 Kenya Standard — Electronic signatures — Metadata requirements KS ISO/TR 14873:2013 Kenya Standard — Information and documentation Statistics and quality issues for web-archiving KS ISO 17724:2003 Kenya Standard — Graphical symbols — Vocabulary KS ISO 28564-1:2010 Kenya Standard — Public information guidance systems Part 1: Design principles and element requirements for location plans, maps and diagrams KS ISO 16069:2004 Kenya Standard — Graphical symbols — Safety signs — Safety way guidance systems (SWGS) KS ISO 17398:2004 Kenya Standard — Safety colours and safety signs — Classification, performance and durability of signs KS ISO 22727:2007 Kenya Standard — Graphical symbols — Creation and design of public information symbols - Requirements KS ISO 3864 -3:2006 Kenya Stafidard — Graphical symbols — Safety colours and safety signs Part 3: Design principles for graphical symbols for use in safety signs Electrotechnical KS ISO/IEC 19788-1:2011 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources Part 1: Framework KS ISO/IEC 19788-5:2012 Kenya'Standard — Information technology — Learning, education and training — Metadata for learning resources Part 5: Educational elements KS ISO/IEC 24751-1:2008 Kenya Standard — Information technology — Individualized adaptability and accessibility in e-learning, education and training Part 1: Framework and reference model KS ISO/IEC 24751-2:2008 Kenya Standard — Information technology -- Individualized adaptability and accessibility in e-learning, education and training Part 2: "Access for all" personal needs and preferences for digital delivery KS ISO/IEC 24751-3:2008 Kenya Standard — Information technology — Individualized adaptability and accessibility in e-learning, education and training Part 3: "Access for all" digital resource description KS ISO/IEC 19788-3:2011 Kenya Standard — Information processing systems — Vocabulary Part 3: Equipment technology KS ISO/IEC 19788-2:2011 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources Part 2: Dublin Core elements KS ISO/IEC 19788-5:2012 Kenya Standard — Information technology — Learning, education and training — Metadata for learning resources Part 5: Educational elements KS 1021:1989 Kenya Standard — Specification for general purpose steel wire strand KS 04-469-1:1984 Kenya Standard --- Specification for high fidelity audio equipment and systems Part 1: General KS 04-469-5:1984 Kenya Standard — Specification for high fidelity audio equipment and systems Part 5: Microphones KS IEC 60320-1:2007 Kenya Standard — Kenya Standard — Appliances couplers for household and similar general purposes Part 1: General requirements KS IEC.60728-5:2007 Kenya Standard, — Kenya Standard — Cable networks for television signals, sound signals and interactive services Part 5: Hearrepd equipment KS IEC 60799:1998 Kenya Standard — Electrical accessories — Cord sets and interconnection cord sets KS IEC 62116:2008 Kenya Standard — Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters KS IEC 62055-41:2007 Kenya Standard — Electricity metering — Payment systems Part 41: Standard transfer specification (STS) — Application layer protocol for one-way token carrier systems KS IEC 62056-61:2006 Kenya Standard — Electricity metering — Data exchange for meter reading, tariff and load control Part 61: Object identification system (OBIS) ' KS IEC 62056-62:2006 Kenya Standard — Electricity metering — Data exchange for meter reading„ tariff and load control Part 62: Interface classes KS IEC 62056-53:2006: Kenya Standard — Electricity metering — Data exchange for meter reading, tariff and load . control Part 53: COSEM application layer KS IEC 61400-11:2006 Kenya Standard — Wind turbines Part 11: Acoustic noise measurement techniques KS IEC/TS 62257-9-5:2013 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-5: Selection of stand- alone lighting kits for raraFelectrification KS ISO 9806:2013 Kenya Standard — Solar energy — Solar thermal collectors — Test methods KS IEC 60034-1:2010 Kenya Standard — Rotating electrical machines Part 1: Rating and performance KS IEC 60034-4:2008 Kenya Standard — Rotating electrical machines Part 4: Methods for determining synchronous machine quantities from tests KS IEC 60904-2:2007 Kenya Standard — Photovoltaic devices Part 2: Requirements for reference solar devices KS IEC 61400-1:2005 Kenya Standard — Wind turbines Part 1: Design requirements KS IEC 61400-2:2006 Kenya Standard — Wind turbines. Part 2: Design requirements for small wind turbines KS IEC 61400-12-1:2005 Kenya Standard — Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbines KS IEC/TS 61400-13:2001 Kenya Standard — Wind turbine generator systems Part 13: Measurement of mechanical load's KS IEC/TS 61400-23:2001 Kenya Standard — Wind turbine generator systems Part 23: Full-scale structural testing of rotor blades KS IEC 61400-25-1:2006 Kenya Standard — Wind turbines Part 25-1: Communications for monitoring and control of wind power plants -- Overall description of principles and models KS IEC 61400-25-2:2006 Kenya Standard — Wind turbines Part 25-2: Communications for monitoring and control of wind power plants — Information models KS IEC 61400-25-3:2006 Kenya Standard — Wind turbines Part 25-3: Communications for monitoring and control of wind power plants — Information exchange models KS IEC 61400-25-5:2006 Kenya Standard — Wind turbines Part 25-5: Communications for monitoring and control of wind power plants — Conformance testing KS IEC/TS 62257-1:2003 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 1: General introduction to rural electrification KS IEC/TS 62257-2:2004 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 2: From requirements to a range of electrification systems KS IEC/TS 62257-3:2004 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 3: Project development and management KS IEC/TS 62257-4:2005 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 4: System selection and design KS IEC/TS 62257-5:2005 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 5: Protection against electrical hazards KS IEC/TS 62257-6:2005 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 6: Acceptance, operation, maintenance and replacement IEC/TS 62257-9-2:2006 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-2: Microgrids KS IEC/TS 62257-9-3:2006 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-3: Integrated system User interface KS IEC/TS 62257-9-4:2006 Kenya Standard -- Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-4: Integrated system — User installation KS IEC/TS 62257-12-1:2007 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 12-1: Selection of self ballasted lamps (CFL) for rural electrification systems and recommendations for household lighting equipment KS IEC 62124:2004 Kenya Standard — Photovoltaic (PV) stand- alone systems — Design verification KS IEC 61400-4:2012 Kenya Standard — Wind turbines Part 4: Design requirements for wind turbine gearboxes KS IEC/TS 62257-8-1:2007 Kenya Standard — Recommendations for small renewable energy and hybrid systems for rural electrification Part 8-1: Selection of batteries and battery management systems for stand-alone electrification systems — Specific case of automotive flooded lead-acid batteries available in developing countries KS 41-1:1977 Kenya Standard — Glossary of terms related to electrochemistry and electrometallurgy trade Part 1: General tests KS 111-1:1998 Kenya Standard — Intruder alarm systems in buildings — Specification Part 1: Glossary of terms KS 111-2:1998 Kenya Standard — Intruder alarm systems in buildings — Specification Part 2: Symbols KS 111-3:1998 Kenya Standard -- Intruder alarm systems in buildings — Specification Part 3: Systems installed in clients premises KS 111-4:1985 Kenya Standard — Intruder alarm systems in buildings — Specification Part 4: Central stations KS 111-5:1998 Kenya Standard — Intruder alarm systems in buildings — Specification Part 5: Detection devices for internal use KS 111-6:1998 Kenya Standard -- Intruder alarm systems in buildings Specification Part 6: Wire-free systems installed in client's premises KS 111-7:1998 Kenya Standard — Intruder alarm systems in buildings — Specification Part 7: Alarm transmission systems KS 186-2:1993 Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 2: Heat-sensitive (point) detectors containing a static element KS 186-3:1980 Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 3: Heat-sensitive detectors KS 186-4:1980 Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 4: Smoke-sensitive (Point-type) detectors KS 186-5:1998 Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 5: Self-Contained smoke detectors KS 186-6:1980 Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 6: Control and indicating equipment KS 186-7:1985 Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 7: Methods of test of sensitivity to fire KS 186-8:1982 Kenya Standard — Automatic electrical fire alarm systems in buildings — Specification Part 8: Components for automatic fire alarm systems for residential premises KS 500:1982 Kenya Standard -- Filament lamps for road vehicles — Specification KS 1386:1999 Kenya Standard -- Flashlights — Specification KS 1450:1999 Kenya Standard — Lamps for flashlights — Specification KS 1723:2001 Kenya Standard — Code of practice for documentation for social alarm system KS 1724:2001 Kenya Standard — Specification for multi- frequency tone signalling protocol for social alarm systems KS 1861:2005 Kenya Stan dard — Electrical installation — Secondary batteries installed in buildings KS 600:1985 Kenya Standard — Methods of measuring the characteristics of disc playing record units KS 1590-1:2001 Kenya Standard — Siting of radio communi cations facilities — Specification Part 1: Low f requency, medium frequency and high frequency transmitting and high frequency receiving facilities KS 1590-2:2001 Kenya Standard — Siting of radio communications facilities — Specification Part 2: Guidelines for fixed, mobile and broadcasting services operating at frequency above 30 MHz KS 1590-3:2001 Kenya Standard — Siting of radio communications facilities — Specification Part 3: Fixed location satellite earth stations KS 1629:2001 Kenya Standard — Methods of measuring the characteristics of reproducing equipment for digital audio compact discs KS 1671-1:2005 Kenya Standard — Domestic and similar electronic equipment interconnection requirements — Audiovisual link — Specification Part 1: General requirements KS 1671-2.1:2005 Kenya Standard — Domestic and similar electronic equipment interconnection requirements — Audiovisual link --- Specification Part 2-1: Signal quality matching and automatic selection of source devices KS 1671-2.2:2005 Kenya Standard — Domestic and similar electronic equipment interconnection requirements — Audiovisual link — Specification Part 2-2: Basic system oriented commands KS 1671-2.3:2005 Kenya Standard — Domestic and similar electronic equipment interconnection requirements — Audiovisual link — Specification Part 2-3: System oriented application KS IEC 62002-1:2008 Kenya Standard — Mobile and portable DVB- T/H radio access Part 1: Interface specification KS IEC 62002-2:2008 Kenya Standard — Mobile and portable DVB- T/H radio access Part 2: Interface conformance testing KS IEC/TR 62002-3:2008 Kenya Standard — Mobile and portable DVB-T/H radio access Part 3: Measurement Interface KS IEC/TR 62002-4:2009 Kenya Standard — Mobile and portable DVB-T/H radio access Part 4: Measurement methods for total radiated sensitivity in hand- held broadcast terminals KS 239:1996 Kenya Standard — Specification for safety requirements for domestic and similar electrical appliances KS 1111-10:1993 Kenya Standard — Specification for household and similar electrical appliances Part 10: Particular requirements for appliances for skin and hair care KS 1111-9:1993 Kenya Standard — Specification for safety requirements for household electrical appliances Part 9: Requirements for a.c. electric shavers, hair clippers and similar appliances KS 1111-5:1991 Kenya Standard — Specification for safety requirements for household electrical appliances Part 5: Particular requirements for battery powered shavers, hair clippers and similar appliances and their charging and battery assemblies KS 1111-11:1995 Kenya Standard — Specification for household and similar electrical appliances Part 11 Particular requirements for electrical clocks • KS 1111-20:1997 Kenya Standard — Specification for household electrical appliances Part 20: Particular Requirements for electric kitchen machines KS 1111-22:1997 Kenya Standard — Specification for household electrical appliances Part 22: Particular Requirements for electric fans and regulators KS 1111-8:1993 Kenya Standard — Specification for safety requirements for household and similar electrical appliances Part 8: Particular KS 1111-31:2005 KS 1111-26:2005 KS 1111-39:2005 KS 1111-42:2005 KS 1111-12:1993 KS 1111-17:1998 KS 1111-19:1998 KS 1111-19:1998 KS 1111-13:1993 KS 1111-3:1994 KS 1111-4:1993 KS 1111-7:1997 KS 1111-15:1993 KS 1111-18:1991 KS 1111-14:1993 KS 1111-1:2000 KS 1111-6:2000 9th August, 2019 THE KENYA GAZETTE 2907 requirements for frying pans, deep fat fryers and similar appliances Kenya Standard — Safety of household and similar electrical appliances Part 31: Particular requirements for commercial electric grillers and toasters Kenya Standard — Safety of household and similar electrical appliances Part 26: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Kenya Standard — Safety of household and similar electrical appliances Part 39: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems Kenya Standard — Safety of household and similar electrical appliances Part 42: Particular requirements for pedestrian-controlled mains- operated lawn scarifiers and aerators. Kenya Standard — Specification for household and similar electrical appliances Part 12: Particular requirements for sewing machines Kenya Standard — Specification for household and similar electrical appliances Part 17 Particular requirements for commercial electric griddles and griddle grills Kenya Standard — Specification for household and similar electrical appliances Part 19: Particular Requirements for commercial electric forced convection ovens ' Kenya Standard — Specification for household and similar electrical appliances Part 19: Particular Requirements for commercial electric forced convection ovens Kenya Standard — Specification for household and similar electrical appliances Part- 13: Particular requirements for room heaters Kenya Standard —Specification for safety requirements for household electrical appliances - Part 3: Particular requirements for dishwashers Kenya Standard --- Specification for safety requirements for household electrical appliances Part 4: Particular requirements for washing machines Kenya Standard — Specification for safety requirements for domestic and similar electrical appliances Part 7: Particular requirements for tumbler dryers Kenya Standard — Specification for household and similar electrical appliances Part 15: Particular requirements for commercial electric ranges, ovens and hob elements Kenya Standard — Specification for household and similar electrical appliances Part 18: Particular requirements for commercial electric multi-purpose cooking pans Kenya Standard — Specification for household and similar electrical appliances Part 2: Particular requirements for coffee mills and coffee grinders Kenya Standard— Specification for safety of household and similar electrical appliances Part 1: Particular requirements for microwave ovens Kenya Standard — Specification for safety requirements for household and similar electrical appliances Part 6: Particular requirements for toasters, grills, roasters and similar appliances Kenya Standard — Safety of household and similar electrical appliances Part 23: Particular requirements for instantaneous water heaters Kenya Standard — Safety of household and similar electrical appliances Part 24: Particular requirements for spin extractors Kenya Standard — Safety of household and similar electrical appliances Part 25: Particular requirements for refrigerating appliances, ice- cream appliances and ice-makers Kenya Standard — Safety of household and similar electrical appliances Part 26: Particular requirements for ranges hoods Kenya Standard — Safety of household and similar electrical appliances Part 27: Particular requirements for appliances for heating liquids Kenya Standard — Safety of household and similar electrical appliances Part 30: Particular requirements for commercial electric boiling pans Kenya Standard — Safety of household and similar electrical appliances Part 32: Particular requirements for commercial electric hot cupboards Kenya- Standard — Safety of household and similar electrical appliances Part 33: Particular requirements for sauna heating appliances Kenya Standard — Safety of household and similar electrical appliances Pan. 34: Particular requirements for projectors and similar appliances Kenya Standard — Safety of household and similar electrical appliances Part 35: Particular requirements for insect killers Kenya Standard — Safety of household and similar electrical appliances Part 36: Particular requirements for floor-treatment and floor- cleaning machines, for industrial and commercial use Kenya Standard — Safety of household and similar electrical appliances 'Part 37: Particular requirements for portable immersion heaters Kenya Standard — Safety of household and similar electrical appliances Part 38: Particular requirements for fabric steamers Kenya Standard — Safety of household and similar electrical appliances Part 40: Particular requirements for commercial microwave ovens Kenya Standard — Safety of household and similar electrical appliances Part 41: Particular requirements fOr walk-behind and hand-held lawn trimmers and lawn edge trimmers Kenya Standard — Safety of household and similar electrical appliances Part 43: Particular requirements for scissors type grass shears Kenya Standard — Safety of household and similar electrical appliances Part 44: Particular requirements for drives for vertically moving garage doors for residential use Kenya Standard — Safety of household and similar electrical appliances Part 45: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment Kenya Standard — Safety of household and similar electrical appliances Part 46: Particular requirements for humidifiers KS 1111-23:2002 KS 1111-24:2005 KS 1111-25:2005 KS 1111-28:2005 KS 1111-27:2005 KS 1111-30:2005 KS 1111-32:2005 KS 1111-33:2005 KS 1111-34:2005 KS 1111-35:2005 KS 1111-36:2005 KS 1111-37:2005 KS 1111-38:2005 KS 1111-40:2005 KS 1111-41:2005 KS 1111-43:2005 KS 1111-44:2005 KS 1111-45:2005 KS 1111-46:2005 KS OIML R 47:1979 Kenya Standard — Standard weights for testing of high capacity weighing machines KS OIML R 66:1985 Kenya Standard — Length measuring instruments KS OIML R 111-1:2004 Kenya Standard — Weights of Classes El, E2, F1, F2, M1, M1-2, M2, M2-3 and M3 Part 1: Metrological and technical requirements KS OIML R 111-2:2004 Kenya Standard — Weights of Classes El, E2, F 1 , F2, M1, MI -2, M2, M2-3 and M3 Part 2: Test report format KS OIML R 92:1989 Kenya Standard — Wood-moisture meters — Verification methods and equipment: General provisions KS OIML R133:2002 Kenya Standard Liquid-in-glass thermometers KS OIML R 23:1975 Kenya Standard — Tyre pressure gauges for motor vehicles KS OIML R 52:2004 Kenya Standard — Hexagonal weights — Metrological and technical requirements KS OIML R 55:1981 Kenya Standard — Speedometers, mechanical odometers and chronotachographs for motor vehicles — Metrological regulations KS OIML R 88:1998 Kenya Standard— Integrating-averaging sound level meters KS OIML R 91:1990 Kenya Standard — Radar equipment for the measurement of the speed of vehicles KS OIML R 130:2001 Kenya Standard — Octave-band and one-third- octave-band filters KS OIML R 102:1992 Kenya Standard — Sound calibrators KS OIML R 44:1985 Kenya Standard — Alcoholometers and alcohol hydrometers and thermometers for use in alcoholometry KS OIML R 69:1985 Kenya Standard — Glass capillary viscometers for the measurement of kinematic viscosity — Verification method Chemical KS ISO 13752:1998 Kenya Standard — Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference KS ISO 14956:2002 Kenya Standard — Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty KS ISO 16362:2005 Kenya Standard — Ambient air — Determination of particle phase polycyclic aromatic hydrocarbons by high performance liquid chromatography KS ISO 12884:2000 Kenya Standard — Ambient air Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons — Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses KS ISO 13794:1999 Kenya Standard = Ambient air — Determination of asbestos fibres — Indirect transfer transmission electron microscopy method KS ISO 10498:2004 Kenya Standard — Ambient air — Determination of sulfur dioxide — Ultraviolet fluorescence method. KS ISO 11222:2002 Kenya Standard — Stationary Source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications Kenya Standard -,- strategy •for formald Indoor air Part 2: Sampling ehyde Kenya Standard - Stationary source emissions - Sampling and determination of gaseous fluoride content 9th August, 2019 KS ISO 20988:2007 Kenya Standard — Air quality --- Guidelines for estimating measurement uncertainty KS ISO 16107:2007 Kenya Standard— Workplace atmospheres — Protocol for evaluating the performance of diffusive samplers KS ISO 16000-1:2004 Kenya Standard — Indoor air Part 1: General aspects of sampling strategy KS ISO 16000-5:2007 Kenya Standard — Indoor air Part 5: Sampling strategy for volatile organic compounds (VOCs) KS ISO 7168-2:1999 Kenya Standard — Air quality — Exchange of data Part 2: Condensed data forma KS EAS 750:2010 Kenya Standard — Air quality -- Emissions to the air by cement factories guidelines KS EAS 751:2010 Kenya Standard — Air quality — Specification KS EAS 752:2010 Kenya Standard — Air quality — Tolerance limits of emissions discharged to the air by fact KS ISO 21438-3:2010 Kenya Standard — Workplace atmospheres — Determination of inorganic acids by ion chromatography Part 3: Hydrofluoric acid and particulate fluorides • KS ISO 9486:1991 Kenya Standard — Workplace air — Determination of vaporous chlorinated hydrocarbons — Charcoal tube / solvent desorption / gas chromatographic method KS ISO 9487:1991 Kenya Standard — Workplace air — Determination of vaporous aromatic hydrocarbons — Charcoal tube / solvent desorption / gas chromatographic method KS ISO 4219:1979 Kenya Standard- -- Air quality — Determination of gaseous Sulphur compounds in ambient air — Sampling equipment KS ISO 8756:1994 Kenya Standard — Air quality -- Handling of temperature, pressure and humidity data KS ISO 8672:1999 Kenya Standard -- Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy — Membrane filter method KS ISO 8760:1990 Kenya Standard — Workplace air -- Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication KS ISO 8518:2001 Kenya Standard --- Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method KS ISO 10313:1993 Kenya Standard — Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method KS ISO 21438-2:2009 Kenya Standard — Workplace atmospheres — Determination of inorganic acids by ion chromatography Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydro bromic acid and nitric acid) KS ISO 16000-17:2008 Kenya Standard — Indoor air Part 17: Detection and enumeration of moulds-Culture- based method KS ISO 10155:1995 Kenya Standard --- Stationary Source emissions — Automated monitoring of mass concentrations of particles -- Performance characteristics, test methods and specifications KS ISO 10397:1993 Kenya Standard — Stationary Source emissions — Determination of asbestos plant emissions — Method by fibre count measurement KS ISO 4224:2000 Kenya Standard — Ambient air — Determination .of carbon monoxide - Non- dispersive infrared spectrometry method KS ISO 7708:1995 Kenya Standard — Air quality — Partied size fraction defmitions for health-related sampling KS ISO 6767:1990 Kenya Standard — Ambient air Determination of the mass concentration of Sulfur dioxide — tetrachloromercurate (TCM) / pararosaniline method KS ISO 7996:1985 Kenya Standard — Ambient air — Determigation of the mass concentration of nitrogen oxides — Chemiluminescence method KS ISO 8186:1989 Kenya Standard — Ambient air s — Determination of the mass concentration of carbon monoxide — Gas chromatographic method KS ISO 10312:1995 Kenya Standard — Ambient air — Determination of asbestos fibres — Direct- transfer transmission electron microscopy method KS ISO 10473:2000 Kenya Standard — Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method KS ISO 13964:1998 Kenya Standard — Determination of ozone in ambient air — Ultraviolet photometric method KS ISO 16000-2:2004 KS ISO 15713:2006 KS ISO 16017-1:2000 Kenya Standard — Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography Part 1: Pumped sampling KS ISO 16017-2:2003 Kenya Standard — Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography Part 2: Diffusive sampling KS ISO 16000-4:2004 Kenya Standard — Indoor air Part 4: Determination of formaldehyde — Diffusive sampling meth KS ISO 16000-6:2004 Kenya Standard — Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax Tar sorbent, thermal desorption and gas KS ISO 16000-9:2006 Kenya Standard -- Indoor air Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method KS ISO 16000-8:2007 Kenya Standard — Indoor air Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions. KS ISO 16000-10:2006Kenya Standard — Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method KS ISO 16000-11:2006 KenYa Standard — Indoor air Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens KS ISO 11222:2002 Kenya Standard — Air quality — Determination of the uncertainty of the time average of air quality measurements KS ISO 20988:2007 Kenya Standard — Air quality — Guidelines for estimating measurement uncertainty KS ISO 13752:1998 Kenya Standard — Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference. KS ISO 14956:2002 Kenya Standard — Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty KS ISO 16362:2005 Kenya Standard — Ambient air — Determination of particlephase polycyclic aromatic hydrocarbons by high performance liquid chromatography. KS ISO 12884:2000 Kenya Standard — Ambient air — Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons — Collection on sorbent-backed filters with gas chromatographic/masS spectrometric analyses KS ISO 13794:1999 Kenya Standard -- Ambient air — Determination of asbestos fibres — Indirect transfer transmission electron microscopy method KS ISO 17734-2:2006 Kenya Standard — Determination of organ nitrogen compounds in air using liquid chromatography and mass spectrometry Part 2: Amines and amino isocyanates using tributylamine and ethyl chloroform ate derivatives KS ISO 10498:2004 Kenya Standard — Ambient air — Determination of sulfur dioxide — Ultraviolet fluorescence method KS ISO 20552:2007 Kenya Standard — Workplace air — Determination of mercury vapour -- Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry KS ISO 16622:2002 Kenya Standard — Meteorology — Sonic anemometers/thermometers — Acceptance test methods for mean wind measurements KS ISO 14965:2000 Kenya Standard — Air quality — Determination of total non-methane organic compounds — Cryogenic preconcentration and direct flame ionization detection method KS ISO 14966:2002 Kenya Standard — Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method KS ISO 16200-2:2000 Kenya Standard — Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 2: Diffusive sampling method KS ISO 16702:2007 Kenya Standard — Workplace air quality — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography KS ISO 15767:2003 Kenya Standard — Workplace atmospheres — Controlling and characterizing errors in weighing collected aerosols KS ISO 16740:2005 Kenya Standard — Workplace air — Determination of hexavalent chromium in airborne particulate matter — Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide KS ISO 17734-1:2006 Kenya Standard — Determination of organ nitrogen compounds in air using liquid chromatography and mass spectrometry Part 1: Isocyanates using tributylamine derivatives. KS ISO 16200-1:2001 Kenya Standard — Workplace air quality — Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography Part 1: Pumped sampling method Kenya Standard — Stationary source emissions — Determination of the volume flowrate of gas streams in ducts — Automated method KS ISO 15202-1:2000 Kenya Standard — Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 1: Sampling KS ISO 15202-2:2001 Kenya Standard — Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 2: Sample preparation KS ISO 15202-3:2004 Kenya Standard Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 3: Anal KS ISO 12039:2001 Kenya Standard — Stationary source emissions — Determination of carbon monoxide, carbon dioxide and oxygen — Performance characteristics and calibration of automated measuring systems KS ISO 11632:1998 Kenya Standard — Stationary source emissions — Determination of mass concentration of sulfur dioxide - Ion chromatography method KS ISO 11174:1996 Kenya Standard — Workplace air — Determination of particulate cadmium and cadmium compounds -- Flame and electrothermal atomic absorption spectrometric method KS ISO 11041:1996 Kenya Standard — Workplace air — Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour — Method by hydride generation and atomic absorption spectrometry KS ISO 11338-2:2003 Kenya Standard — Stationary source emissions — Determination of gas and particle-phase polycyclic aromatic hydrotarbons Part 2: Sample preparation, clean-up and determination KS ISO.11338-1:2003 Kenya Standard — Stationary source emissions — Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling KS ISO 12141:2002 Kenya Standard — Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method KS ISO 10780:1994 Kenya Standard — Stationary Source emissions — Measurement of velocity and volume flowrate of gas streams in ducts KS ISO 11564:1998 Kenya Standard Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Naphthylethylenediamine photometric method KS 2495-1:2013 Kenya Standard — Pressure sensitive adhesive tapes with plastic base — Specification Part 1: Plasticized PVC adhesive tapes KS 510:1985 Kenya Standard — Methods of test for adhesives KS ISO 14164:1999 9th August, 2019 THE KENYA GAZETTE 2911 KS 1273:1995 Kenya Standard — Specification for unsaturated polyester resin for body fillers KS 1530:1999 Kenya Standard — Specifications for adhesives for use with ceramic tiles. KS ISO 4586-1:1999 Kenya Standard — High pressure decorative laminates sheets made from thermosetting resins Part 1: Classification and specifications KS ISO 4586-2:1999 Kenya Standard -- High pressure decorative laminates sheets made from thermosetting resins Part 2: Determination of properties KS 1522-1:1999 Kenya Standard — Specification for rubber- based adhesives for tyres and tubes Part 1: Non- curing KS 1518:1999 Kenya Standard — Specification for sunflower oil based long oil alkyd resin KS 1520:1999 Kenya Standard — Specification for safflower oil based long oil alkyd resin KS 1519:1999 Kenya Standard — Specification for soya bean oil based long oil alkyd resin KS 2495-4:2013 Kenya,Standard — Pressure sensitive adhesive tapes with plastic base — Specification part 4: cellulose adhesive tape KS 2495-5:2013 Kenya Standard — Pressure sensitive adhesive tapes with plastic base — Specification Part 5: Unplasticized PVC adhesive tapes KS 2167-5:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 5: Determination of shrinkage grouts KS 2496:2013 Kenya Standard — Methods of sampling and test for pressure sensitive adhesive tapes KS 2167-10:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 10: Determination of wetting capability for adhesives KS 2167-11:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 11: Determination of tensile adhesion strength for cementitious adhesives KS 2167-7:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 7: Concrete slab for test KS 2167-8:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 8: Determination of slip. for adhesives KS 2167-3:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 3: Determination of resistance to abrasion for grouts KS 2167-2:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 2: Determination of chemical resistance of reaction resin mortars KS 2167-1:2008 Kenya Standard — Adhesives and grout for tiles — Test methods Part 1: Determination of transverse deformation for cementitious adhesives and grouts KS 2167-9:2008 Kenya Standard Adhesives and grout for tiles — Test methods Part 9: Determination of shear adhesion strength of dispersion adhesives KS 2495-3:2013 Kenya Standard — Pressure sensitive adhesive tapes with plastic base — Specification Part 3: Polyethylene adhesive tapes KS 2495-2:2013 Kenya Standard — Pressure sensitive adhesive tapes with plastic base — Specification Part 2: Polyester adhesive tapes KS 1290-4:2007 Kenya Standard — Chemical used for treatment of water intended for human consumption Part 4: Calcium hypochlorite Kenya Standard — Chemical used for treatment of water intended for human consumption' Part 4: Calcium hypochlorite Kenya Standard — Specification for bleaching agents Part 3: Chlorinated lime bleaching powder for water treatment Kenya Standard — Chemicals used for treatment of water intended for human consumption — Aluminium sulphate — Specification Kenya Standard — Liquid soap — Specification Kenya Standard — Determination of the microbial inhibition of cosmetic soap bars and liquid hand and body washes — Test method Kenya Standard — Specification for bleaching agents Part 1: Sodium hypochlorite solutions Kenya Standard — Glossary of terms relating to surface active agents Kenya Standard — Glossary of terms relating to disinfectants Kenya Standard — Water for analytical laboratory use — Specification and test methods Kenya Standard — Soaps — Determination of moisture and volatile matter content --- Oven method Kenya Standard — Surface active agents Simplified classification Kenya Standard — Washing powders Determination of active oxygen content Titrimetric method Kenya Standard — Analysis of soaps — Determination of unsaponifiable, unsaponified and unsaponified saponifiable matter Kenya Standard — Surface active agents -- Preparation of water with known calcium hardness Kenya Standard — Surface active agents — Detergents for hand dishwashing — Guide for comparative.testing of performance Kenya Standard — Synthetic organic liquid detergent for household use — Specification Kenya Standard — Oven cleaner and grease remover — Specification Kenya Standard — Carpet and upholstery shampoo — Specification Kenya Standard — Water quality — Determination of the chemical oxygen demand index (ST-COD) --- Small-scale sealed-tube method Kenya Standard — Antibacterial toilet soap — Specification Part 1: Solid Kenya Standard — Antibacterial toilet soap — Specification Part 2: Liquid ' Kenya Standard — Instant hand sanitizers' — Specification Kenya Standard — Chemicals used for treatment of water intended for human consumption -- Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulphate — Specification Kenya Standard — Acidic detergents for 'cleaning -in-place in food and beverage industry — Specification KS 1290-2:1998 KS 1290-3:1998 KS 85:2007 KS EAS 790:2013 KS EAS 794:2013 KS 1290-1:1999 KS 1425:1997 KS 928:2003 KS ISO 3696:1987 KS ISO 672:1978 KS ISO 2131:1972 KS ISO 4321:1977 KS ISO 1067:1974 KS ISO 2174:1990 KS ISO 4198:1984 KS EAS 383:2013 KS EAS 791:2013 KS EAS 792:2013 KS ISO 15705:2002 KS EAS 766-1:2013 KS EAS 766-2: 2013 KS EAS 789:2013 KS 1924:2007 KS 2117:2013 2912 .THE KENYA GAZETTE 9th August, 2019 KS ISO 13300-1:2006 General guidance for the staff of a sensory evaluation laboratory Part 1: Staff responsibilities KS ISO 13300-2:2006 Kenya Standard — Sensory analysis — General guidance for the staff of a sensory evaluation laboratory Part 2: Recruitment and training of panel leaders KS ISO 4121:2003 Kenya Standard — Sensory analysis — Guidelines for the use of quantitative response scales. KS ISO 11132:2012 Kenya Standard — Sensory analysis — Methodology — Guidelines for monitoring the performance of a quantitative sensory panel KS ISO 14183 COR 2010 Kenya Standard — Animal feeding stuffs — Determination of monensin, narasin and salinomycin contents - Liquid chromatographic method using post-column derivatization KS ISO 13914:2004 Kenya Standard — Animal feeding stuffs — Enzymatic determination of total starch content KS ISO 6498:2012 Kenya Standard — Animal feeding stuffs — Guidelines for samples preparation KS ISO 7932:1993 Kenya Standard — Methods for the microbiological examination of food and animal feeding stuffs — Enumeration of Bacillus Cereus KS ISO 8914:1998 Kenya Standard — Methods for the microbiological examination of food and animal feeding stuffs — Detection of Virbrio Parahaemolyticus KS ISO/TS 17764-2:2002 Kenya Standard -- Animal feeding stuffs — Determination of the content of fatty acids Part 2: Gas chromatographic method KS ISO 7088:1981 Kenya Standard — Fish meal — Vocabulary KS EAS 230: 2001 Kenya Standard — Maize bran as livestock feed — Specification KS ISO 10273:2003 Kenya Standard — Microbiology of food and animal feeding stuffs — Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica KS ISO 15213:2003 Kenya Standard — Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions KS ISO 16050:2003 Kenya Standard — Foodstuffs — Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, GI and G2 in cereals, nuts and derived products — High-performance liquid chromatographic method KS 949:1999 Kenya Standard — Specification for rice bran KS EAS 97:1999 Kenya Standard — Fishmeal --- Specification KS 1051:1997 Kenya Standard — Guide on the maximum limits of pesticides residues KS COD STAN 229:1999 Kenya Standard — Recommended methods of analysis for pesticide residues KS CAC/GL 33:1999 Kenya Standard — Methods of sampling for the determination of pesticide residues for compliance with MRLs KS ISO 8398:1989 Kenya Standard — Solid fertilizers Measurement of static angle of repose KS ISO 7742:1988 Kenya Standard — Solid fertilizers Reduction of samples KS ISO 8397:1988 Kenya Standard — Solid fertilizers and soil conditioners — Test sieving. KS 2119:2013 Kenya Standard — Heavy-duty alkaline detergents for 'cleaning-in-place in food and beverage industry -- Specification KS 1923:2007 Kenya Standard — Application of liquid polyaluminium-based coagulants in potable water treatment — Guidelines KS 2159:2008 Kenya Standard -- Chemicals used for treatment of water intended for human consumption — Chlorine dioxide — Specification KS 2158:2008 Kenya Standard — Chemicals used for treatment of water intended for human consumption — Liquefied chlorine gas — Specification KS 2161:2008 Kenya Standard — Products used for treatment of water intended fOr human consumption — Bone charcoal KS 2407:2012 Kenya Standard — Swimming pools water — Quality tolerances KS 2408:2012 Kenya Standard — Soap starch — Specification KS EAS 486:2008 Kenya Standard — Soaps — Determination of content of ethanol-insoluble matter KS EAS 488:2008 Kenya Standard — Surface active agents — Analysis of soaps — Determination of free caustic alkali KS EAS 186:2013 Kenya Standard — Toilet soap — Specification Food KS EAS 770: 2012 Kenya Standard — Fortified sugar Specification KS EAS 348:2004 Kenya Standard — Glossary of terms used in confectionery trade KS EAS 349:2004 Kenya Standard — Glucose syrup — Specification KS 2617:2008 Kenya Standard - Molasses for industrial use - Specification KS EAS 5:2009 Kenya Standard Refined white sugar — Specification KS EAS 749:2014 Kenya Standard — Brown sugars — Specification KS 1792-2:2013 Kenya Standard — Malt-based cocoa products — Specification Part 1: Granulated products KS ISO/TR 12591:2013 Kenya Standard — White tea — Specification Agriculture KS 2065:2007 Kenya Standard — Field beans seed — Specification KS 790:2007 Kenya Standard — Glossary of terms for seed — Specification KS 692:2008 Kenya Standard — Seeds for solanaceous vegetable crops — Specification KS 691:2007 Kenya Standard — Seeds for cucurbit vegetables — Specification KS 1312:2007 Kenya Standard — Sugarcane vegetative planting materials KS ISO 4112:1990 Kenya Standard — Cereals and pulses — Guidance on measurement of the temperature of grains stored in bulk KS 42-2:2008 Kenya Standard — Cereals and pulses Part 2: Determination of the mass of 1000 grains KS EAS 762:2013 Kenya Standard — Dry soy beans — Specification 9th August, 2019 THE KENYA GAZETTE 2913 KS ISO 8634:1991 Kenya Standard Solid fertilizers — Sampling plan for the evaluation of a large delivery KS ISO 10248:1996 Kenya Standard — Fluid fertilizers — De- aeration of suspension samples by film disentraininent KS ISO 8398:1989 Kenya Standard — •Solid fertilizers Measurement of static angle of repose KS ISO 7742:1988 Kenya. Standard.. — Solid fertilizers Reduction of samples KS ISO 8397:1988 Kenya Standard — Solid fertilizers and soil conditioners — Test sieving KS ISO TR 5307:1991 Kenya Standard — Solid fertilizers — Sampling plan for the evaluation of a large delivery KS ISO 10248:1996 Kenya Standard — Fluid fertilizers -- De- aeration of suspension samples by film disentrainment KS ISO 6579 AMD1:2007 Kenya Standard — Recommended methods of analysis for pesticide residues KSIS017372AMD1:2010 Kenya Standard — Methods of sampling for the determination of pesticide residues for compliance with MRLs KS ISO 4833:2003 Kenya Standard — Guide on the maximum limits of peiticides residues KS ISO 1838:1999 Kenya Standard — Specification for fresh pineapples — Guide to storage and transport KS ISO 2169:1999 Kenya Standard — Fruits and vegetables — Physical conditions in cold stores — Definitions and measurements KS COD STAN 188:1993 Kenya Standard — Baby corn KS ISO 6662:1983 Kenya Standard --- Plurris — Guide to cold storage. KS COD STAN 202:1995 Kenya Standard — Kenya Codex standards for couscous KS COD STAN 143:1985 Kenya Standard — Kenya Codex standards for dates KS EAS 330:2002 Kenya Standard — Citrus fruit — Specification KS EAS 332:2002 Kenya Standard — Fresh capsicums — Specification KS EAS 47:2000 Kenya Standard — Fresh papaya Specification KS EAS 56:2000 Kenya Standard — Fresh mushrooms — Specification KS EAS 286-1:2002 Kenya Standard — Cut flowers and cutfoliage Part 1: Fresh cut flowers — Specification. KS 1047:1997 Kenya Standard — Specification for apples and pears KS 1484:1999 Kenya Standard — Specification for asparagus KS ISO 1212:1995 Kenya Standard — Specification for apples — Cold storage KS ISO 6659:1981 Kenya Standard — Sweet pepper — Guide to refrigerated storage and transport KS ISO 2168:1974 Kenya Standard — Table grapes — Guide to cold storage KS ISO 4874:2000 Kenya Standard — Tobacco — Sampling of batches of raw material — General principles KS ISO 8243:2003 Kenya Standard — Cigarettes — Sampling KS 457-2:1995 Kenya Standard — Methods of test for tobacco and tobacco products Part 2: Determination, of nicotine, tar, density and burning quality KS ISO 15154:2003 Kenya Standard — Tobacco — Determination of the content of reducing carbohydrates --- Continuous-flow analysis method KS ISO 15517:2003 Kenya Standard — Tobacco — Determination of the nitrate content — Continuous-flow analysis method KS ISO 6565:2002 Kenya Standard — Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement KS ISO 11454:1997 Kenya Standard — Tobacco and tobacco products — Determination of vapour-phase nicotine in air — Gas-chromatographic method KS ISO 12195:1995 Kenya Standard — Threshed tobacco — Determination of residue stem content KS ISO 13276:1997 Kenya Standard — Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid KS ISO 3402:1999 Kenya Standard — Tobacco and tobacco products — Atmosphere for conditioning and testing KS ISO 16055:2003 Kenya Standard — Tobacco and , tobacco products — Monitor test piece — Requirements and use KS ISO 15153:2003 Kenya Standard — Tobacco — Determination of the content of reducing substances — Continuous-flow analysis method KS ISO 6488-1:1997 Kenya Standard — Tobacco -- Determination of water content Part 1: Karl Fischer method ISO 16632:2003 Kenya Standard — Tobacco and tobacco products — Determination of water content — Gas-chromatographic method KS ISO 2881:1992 Kenya Standard — Tobacco and tobacco products — Determination of alkaloid content — Spectrometric method KS ISO 4876:1980 Kenya Standard — Tobacco and tobacco products — Determination of maleic hydrazide residues KS ISO 2817:1999 Kenya Standard — Tobacco and tobacco products — Determination of silicated residues insoluble in hydrochloric acid KS ISO 6466:1983 Kenya Standard Tobacco and tobacco products, — Determination of dithiocarbamate pesticides residues — Molecular absorption spectrometric method KS ISO 4389:2000 Kenya Standard — Tobacco and tobacco products — Determination of organochlorine pesticide residues — Gas-chromatographic method KS EAS 92-4:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 4: Determination of moisture in tobacco KS EAS 92-7:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 7: Determination of burning quality for cigarettes KS EAS 92-9:2005 Kenya Standard --- Methods of test for tobacco and tobacco products Part 9: Determination of mass loss on heating KS EAS 92-5:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 5: Determination of loose shorts in packets KS EAS 92-6:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 6: Determination of potash in tobacco flame photometric method KS EAS 92-8:2005 Kenya Standard — Methods of•test for tobacco and tobacco products Part 8: Determination of loss of tobacco from the ends - Rotating cylindrical cage method KS EAS 92-3:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 3: Determination of water in smoke total particulate matter by Karl Fischer titrimetric KS EAS 92-2:2005 Kenya Standard — Methods of test for tobacco and tobacco products Part 2: Determination of total particulate matter (tar) in cigarette smoke using the Filtrona 302 smoking machine KS EAS 92-17:2008 Kenya Standard — Methods of test for tobacco and tobacco products Part 17: Cigarettes — Sampling KS 51:2013 Kenya Standard — Ammonium sulphate nitrate (ASN) fertilizer — Specification KS 47:2013 Kenya Standard — Calcium ammonium nitrate (CAN) fertilizer — Specification KS 288:2013 Kenya Standard — Urea fertilizer grade — Specification KS 350:2013 Kenya Standard — Potassium chloride (muriate of potash) fertilizer — Specification KS 351:2013 Kenya Standard — Potassium sulphate (sulphate of potash) fertilizer — Specification KS EAS 456:2007 Kenya Standard — Organic products — Specification Services KS ISO 15535:2012 Kenya Standard — General requirements for establishing anthropometric databases KS ISO 639-4:2010 Kenya Standard — Codes for representation of name of languages Part 4: general principles of coding of name of languages and related entities, and application guidelines KS ISO 6422-1:2010 Kenya Standard Layout key for trade documents Part 1: Paper-based documents KS ISO 15706-2:2007 Kenya Standard — Information and documentation — International Standard Audio- visual Number (ISAN) Part 2: Version identifier KS ISO 639-3:2007 Kenya Standard — Code for representation of names of languages Part 3: Alpha -3 code for comprehensive coverage of languages KS ISO 10075-3:2004 Kenya Standard — Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and assessing mental workload. KS ISO 7730:2005 Kenya Standard — Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria KS ISO 11228-1:2003 Kenya Standard — Ergonomics — Manual handling Part 1: Lifting and carrying KS ISO 17724:2003 Kenya Standard — Graphical symbols — Vocabulary KS ISO 15534-1:2000 Kenya Standard — ErgonoMic design for the safety of machinery Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery KS ISO 15534-2:2000 Kenya Standard — Ergonomic design for the safety of machinery Part 2: Principles for determining the dimensions required for access openings KS ISO 9355-2:1999 Kenya Standard Ergonomic requirements for the design of displays and control actuators Part 2: Displays. KS ISO 11428:1996 Kenya Standard — ErgOnomics — Visual danger signals — General requirements, design and testing KS ISO 10075-2:1996 Kenya Standard — Ergonomic principles related to mental workload Part 2: Design principles KS ISO 639- 6:2009 Kenya Standard — Code for representation of names of languages Part 6: Alpha- 4 code for comprehensive coverage of language variants KS ISO/TS20282-2:2013 Kenya Standard — Usability of consumer products and products for public use Part 2: Summative test methods KS 2391:2013 Kenya Standard — Electronic signatures — Metadata requirements KS ISO/TR 14873:2013 Kenya Standard — Information and documentation Statistics and quality issues for web-archiving KS ISO 17724:2003 Kenya Standard — Graphical symbols — Vocabulary KS ISO 28564-1:2010 Kenya Standard — Public information guidance systems Part 1: Design principles and element requirements for location plans, maps and diagrams KS ISO 16069:2004 Kenya Standard — Graphical symbols — Safety signs — Safety way guidance systems (SWGS) KS ISO 17398:2004 Kenya Standard — Safety colours and safety signs — Classification, performance and durability of signs KS ISO 22727:2007 Kenya Standard — Graphical symbols — Creation and design of public information symbols — Requirements ' KS ISO 3864 -3:2006 Kenya Standard — Graphical symbols — Safety colours and safety signs Part 3: Design principles for graphical symbols for use in safety signs The following standards are hereby withdrawn forthwith; KS ISO/IEC 2382-1:1993 Kenya Standard — Information technology — Vocabulary Part 1: Fundamental terms, to be replaced by ISO/IEC 2382:2015 KS ISO/IEC 2382-2:1976 Kenya Standard — Information technology — Vocabulary Part 2: Arithmetic and logic operations, . to be replaced by ISO/IEC 2382 :2015 KS ISO/IEC 2382-3:1987 Kenya Standard — Information technology — Vocabulary Part 3: Equipment technology, to be replaced by ISO/IEC 2382:2015 KS ISO/IEC 2382-4:1999 Kenya Standard — Information technology — Vocabulary Part 4: Organization of data, to be replaced by ISO/IEC 2382:2015 KS ISO/IEC 2382-5:1999 Kenya Standard — Information technology — Vocabulary Part 5: Representation of data, replaced by ISO/IEC 2382:2015 KS ISO/IEC 29109-5:2012 Kenya Standard — Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 5: Face image data, to be replaced by ISO/IEC 29.109-5:2014 KS ISO IEC TR 27008:2011 Kenya Standard — Information technology -- Security techniques — Guidelines for the assessment of information security controls, to be replaced by KS ISO/IEC TS 27008:2019 KS ISO/IEC 27018:2014 Kenya Standard — Information technology — Security techniques — Code of practice for ' protection of personally identifiable information (PII) in public clouds acting as PII processors, to be replaced by KS ISO/IEC 27018:2019 KS ISO/IEC 29147:2014 Kenya 'Standard — Information technology — Security techniques — Vulnerability disclosure, to be replace by KS ISO/IEC 29147:2018 9th August, 2019 THE KENYA GAZETTE 2915 KS ISO/IEC 9798-3:2006 Kenya Standard — Information technology, — Security techniques --- Entity authentication Part 3: Mechanisms using digital signature techniques, to be replaced by KS ISO/IEC 9798- 3:2019 KS ISO/IEC 10118-3:2004 Kenya Standard — Information technology — Security techniques — Hash-functions Part 3: Dedicated hash-functions, to be replaced by KS ISO/IEC 10118-3:2018 KS ISO/IEC 11770-2:2008 Kenya Standard — Information technology — Security techniques — Key management Part 2: Mechanisms using symmetric techniques,- to be replaced by KS ISO/IEC 11770-2:201& KS ISO/IEC 1 4888-3:2016 Kenya Standard — Information technology — Security techniques — Digital signatures with appendix Part 3: Discrete logarithm based mechanisms, to be replaced by KS ISO/IEC 14888-3:2018 KS 1067- 1:1991 Kenya Standard — Specification for lead-acid stationary batteries Part 1: General requirements; already replaced by. KS IEC 60896-11:2002 1(5 1067-2:1994 Kenya Standard — Specification for lead-acid batteries Part 2: 1994 Requirements for pasted plate type batteries; already replaced by KS IEC 60896-21:2004 KS 869-1:1990 Kenya Standard — Specification for lead-acid traction batteries or cells Part 1: General requirements and methods of test; already replaced by KS IEC 60254-1:2005 KS 869-2:1990 Kenya Standard — Specification for lead-acid traction batteries or cells Part 2: Dimensions of cells and marking of polarity on cells; Already replaced by KS IEC 60254-2:2008 KS 53:1994 Kenya Standard - Standard voltages, Already replaced by KS IEC 60038:2009 KS 186-1:1982 Kenya Standard — Automatic electrical fire alarm systems in Buildings — Specification Part 1: Introduction and definitions, already replaced by KS ISO 7240-1:2014 KS 186-9:1980 Kenya Standard — Automatic electrical fire alarm systems in Buildings — Specification Part 9: Code of practice • for installation and servicing; already replaced by KS ISO 7240- 14:2013 KS 186-10:1982 Kenya Standard — Automatic electrical fire Alarm systems in Buildings — Specification Part 1 0: Manual call point (frangible cover type); al ready replaced by KS ISO 7240-11;2011 KS 469-2:1984 Kenya Standard -- Specification for high fidelity audio equipment and systems Part 2: High fidelity systems for use in vehicles; Reference standard, IEC 60581-11:1981 withdrawn without replacement KS 46' 9-3:1983 Kenya Standard — Specification for high fidelity audio equipment and systems Part 3: Record playing equipment and cartridges; Reference standard, IEC 60581-3:1978 withdrawn without replacement KS 469-6:1984 Kenya Standard — Specification for high fidelity audio equipment and systems Part 6: Amplifiers; Reference standard, IEC 60581- 6:1979 withdrawn without replacement KS 469-8:1984 Kenya Standard — Specification for high fidelity equipment and systems Part 8: Combination equipment; Reference standard, IEC 60581- 8:1986 withdrawn without replacement KS 469-11:1984 Kenya Standard — Specification for high fidelity audio equipment and systems Part 11: High fidelity systems for use in vehicles; Reference standard, IEC 60581-11:1978 withdrawn without replacement KS IEC 61730-1:2004 Kenya Standard — Photovoltaic (PV) module safety qualification Part 1: Requirements for construction, to be replaced by KS IEC 61730- 1:2016 KS IEC,61730-2:2004• Kenya Standard — Photovoltaic (PV) module safety qualification Part 2: Requirements for testing, to be replaced by KS IEC 61730-2:201'6 KS IEC-60598-1:1999 Kenya Standard — Luminaires Part 1: General requirements and tests, to be replaced by XS IEC 60598-1:2017 KS 802-1:1989 Kenya Standard — Specification for cut-size office papers Part 1: General purpose paper to be replaced by KS EAS 933:2019 KS ISO 10545-4:1994 Kenya Standard — Ceramic tiles Part 4: Detetinination of modulus of rupture and breaking strength to be replaced by KS ISO 10545-4:2019 KS 1S010545-6:1995 Kenya Standard — Determination of resistance to deep abrasion for unglazed tiles to be re placed by KS ISO 10545-6:2010 KS COD STAN 41:1981 Kenya Standard — Specification for quick frozen peas KS COD STAN 110:198.1 Kenya Standard — Specification for quick fro ,zen broccoli KS COD STAN 112:19511 Kenya Standard — Quick frozen brussels spn 'tits • KS COD STAN 111:1981 1 Cenya Standard — Quick frozen cauliflower KS COD STAN 114:1981 K :enya Standard — Quick frozen french fried potat oes. All these to be replaced by KS COD EX STAN 77:1981 and KS 2689:2019 KS 268.8:2017 Kenya Standard — Certain canned fruits — Specification to be replaced by KS 2688:2019 KS 2689:2017 Kenya Standard — Quick frozen vegetables — Specification to be replaced by KS 2689:2019 KS 2687:2017 Kenya Standard- — Kenya Standard — Pickled fruits and vegetables — Specification to be replaced by KS 2687:2019 KS 26 83:2017 Kenya Standard — Brie cheese — Specification to bat replaced by KS 2683: 2019 KS 2682:2017 Kenya Standard — Camembert cheese — Specification to ,he replaced by KS 2682: 2019 KS 2310:2014 Kenya Standard — Unsweetened condensed milk — Specific:. ttion to be replaced by KS 2510:2019 KS 2509:2014 Kenya Standard - - Processed cheese — Specification to be rei "laced by KS 2509:2019 KS 1178:1995 Kenya Standard — Canned tropical fruit salad — Specification to be replaced by KS 1178:2019 KS 28-1:2015 Kenya Standard -- Chees e — Specification Part 1: General requirements t o be replaced by KS 28-1:2019 KS 28-2:2015 Kenya Standard — Cheese —:Specification Part 2: Cheddar to be replaced 133 KS 28-2:2019 KS 28-3:2015 Kenya Standard — Cheese - - Specification Part 3: Gouda to be replaced by K S 28-3:2019 KS 28-4:2015 Kenya Standard — Cheese — • Specification Part 4: Tilsiter/Tilster to be rep, laced by KS 28- 4:2019 KS 2166:2009 Kenya Standard — Icing sugar — Specification to be replaced by KS 2166:201! KS 436-2:2013 KS 998:2008 Textile and Leather KS 2174:2009 KS 1661:2001 KS 2238:2010 KS 559-1:2014 KS 1267-2:2011 • KS 640-1:1986 KS 640-2:1986 KS 1037:1990 KS 629:2014. KS ISO 13301:2002 KS ISO 12405-1:2011 KS ISO 12405-2:2012 KS ISO 6469-3:2011 Kenya Standard — Cocoa powder — Specification Part 2: Cocoa-sugar mixtures to be replaced by KS 436-2:2019 Kenya Standard Chocolates — Specification for to be replaced by KS 998:2019 Kenya Standard — Measurement of physical properties of cotton fibres by high volume instruments — Test methods to be replaced by KS 2174:2019 Kenya Standard — Specification for canvas shoes with rubber soles to be replaced by KS 1661:2019 Kenya Standard — Baby shawls — Specification to be replaced by KS 2238:2019 Kenya Standard — Men's and boy's trousers — Specification Part I: Making up requirements to be replaced by KS 559-1:2019 Kenya Standard Pillows for domestic use — Specification Part 2: Synthetic filled pillows to be replaced by KS 1267-2:2019 Kenya Standard — Specification for men's and boy's pyjamas Part 1: Making up requirements to be replaced by KS 640-1:2019 Kenya Standard — Specification for men's and boy's pyjamas Part 2: Measurements for pyjamas to be replaced by KS 640-1;2019 Kenya Standard — Methods of test for woven bags to be replaced by KS 1037:2019 Kenya Standard — Sweaters — Specification to be replaced by KS 629:2019 Kenya Standard — Sensory analysis — Methodology — General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure, to be replaced by KS ISO 13301:2018 Kenya Standard — Electrically propelled road vehicles — Safety specifications Part 3: Protection of persons against electric shock to be replaced by KS ISO 6469-3:2018 Kenya Standard — Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems Part I :High- power applications, to be replaced by KS ISO 12405-4:2018 Kenya Standard — Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems Part 2:High- energy applications, to be replaced by KS ISO 12405-4:2018 KS 1938-4:2012 Kenya Standard — Handling, storage, and distribution of Liquefied Petroleum Gas (LPG) in domestic, commercial, and industrial installations — Code of practice Part 1: Storage and filling sites for refillable LPG containers of capacity not exceeding 150 1 to be replaced by KS EAS 924-1:2018 KS 1938-6:2012 Kenya- Standard — Handling, storage, and distribution of Liquefied Petroleum. Gas (LPG) in domestic, commercial, and industrial installations — Code of practice Part 2: LPG installations involving gas storage vessels of individual water capacity exceeding 150 L and combined water capacity not exceeding 9 000 L per installation, to be replaced by KS EAS 924- 2:2018 KS 2223:2010 Kenya Standard — Inspection and testing of Liquefied Petroleum Gas (LPG) road tankers to be replaced by KS EAS 925:2018 KS 2270:2010 Kenya Standard — Bulk Liquefied Petroleum Gas (LPG) road tankers — Assembling — Requirements to be replaced by KS EAS 902:2018 KS 2224:2010 Kenya Standard — Road tankers — Welded steel tanks for Liquefied Petroleum Gas (LPG) — Design and manufacture to be replaced with KS EAS 903:2018 KS 1017-1:1995 Kenya Standard — Specification for approval testing of welders working to approved welding procedures Part 1: Tig or mig welding of aluminium and its alloys to be replaced by KS ISO 9606-1:2012 KS 1017-2:1990 Kenya Standard — Specification for approval testing of welders working to approved welding procedures Part 2: ARC welding of tube to tube- plate joints in metallic materials to be replaced by KS ISO 9606-2:2012 KS 154:2000 Kenya Standard — Specification for both plain and fork hoes, to be replaced by KS EAS 132:1999 KS 1515:2000 Kenya Standard — Code of practice for inspection of road vehicles to be replaced by KS 1515:2019 KS 1814:2018 Kenya Standard — Biomass stoves — Performance requirements to be replaced by KS 1814:2019 KS ISO 8965:1999 Kenya Standard — Logging industry — Technology — Terms to be replaced by KS ISO 8965:2013 KS ISO 22157-1:2004 Kenya Standard — Bamboo — Determination of physical and mechanical properties to be replaced by KS ISO 22157:2019 KS ISO/TR 22157-2:2004 Kenya Standard — Bamboo — Determination of physical and mechanical properties Part 2: Laboratory manual to be replaced by KS 140 22157:2019 KS 2277-1:2011 Kenya Standard — Schools and colleges — Safety for design and technology — Health and safety management Part 1: Guidelines, to be replaced by KS 2277-1:2019 KS 2277-2:2011 Kenya Standard — Schools and colleges — Safety for design and technology Part 2: Planning and services, to be replaced by KS 2277-2:2019 KS 2277-3:2012 Kenya Standard — Schools and Colleges — Safety for design and technology Part 3: Teaching areas, to be replaced by KS 2277- 3:2019 KS 674-1:2008 Kenya Standard — Dog food — Specification, To be replaced by KS EAS 58:2000 KS ISO 7409:1984 Kenya Standard — Fertilizers — Marking — Presentation and declarations, to be replaced by KS ISO 7409:2018 KS ISO 6469-1:2009 Kenya Standard — Electrically propelled road vehicles — Safety specifications Part 1:0n- board rechargeable energy storage system (RESS) to be replaced by KS ISO 6469-1:2019 KS ISO 12405-3:2014 Kenya Standard — Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems Part 3: Safety performance requirements to be replaced by KS ISO 6469-1:2019 9th August, 2019 THE KENYA GAZETTE KS 2277-4:2012 Kenya Standard — Schools and Colleges — Safety for design and technology Part 4: Materials to be replaced by KS 2277-4:2019 KS 1829:2004 Kenya Standard — Labelling of products — General"requirements to be replaced by KS 1829:201.9 KS ISO 22000:2005 Kenya Standard — Food safety management systems — Requirements for any organization in the food chain, To be replaced by KS ISO 22000:2018 Date the 29th July, 2019. BERNARD NJIRIANI, PTG 294/19-2/ 0 Secretary, National Standards Council.