GAZETTE NOTICE NO. 1235

PURSUANT to section 9 (1) of the Standards Act, the National Standards Council declares the specifications or codes of practice appearing in the schedule hereto to be Kenya Standards with effect from the date of publication of this notice. Number Title of Specification or Code of Practice Chemical KS 929:2010 Kenya Standard — Chemical disinfectants and antiseptics Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, step 1), Second Edition. KS 1200:2010 Kenya Standard — Scouring pads – Specification, Second Edition. 4th February, 2011 THE KENYA GAZETTE 367 Mechanical Engineering KS 1319:2010 Kenya Standard — Wooden — Adjustable Axillary Crutches — Specification, Second Edition. KS 2232:2010 Kenya Standard — Adjustable Axillary Crutches - Specification, First Edition. KS 2233:2010 Kenya Standard — Metal Elbow Crutches — Specification, First Edition. KS 149-3:2010 Kenya Standard — Plastics piping system for water supply – Unplasticized Polyvynil Choride (PVC-U) — Specification Part 3: Nominal Diameters, wall thicknesses and nominal pressures (Inch Series), Third Edition. KS 2210-1:2010 Kenya Standard — Threaded unplasticized polyvinyl chloride (PVC-U) water well filter pipes and casings Part 1: DN 35 to DN 100 pipes with Whitworth pipe thread, First Edition. KS 2210-2:2010 Kenya Standard — Threaded unplasticized polyvinyl chloride (PVC-U) water well filter pipes and casings Part 2: DN 100 to DN 200 pipes with trapezoidal thread, First Edition. KS 2210-3:2010 Kenya Standard — Threaded unplasticized polyvinyl chloride (PVC-U) water well filter pipes and casings Part 3: DN 250 to DN 400 pipes with trapezoidal thread, First Edition. KS 9-4:2010 Kenya Standard — Gas cylinders — Refillable welded low carbon steel cylinders for liquefied petroleum gas (LPG) exceeding 1.5 litre water capacity Part 4: Requalification and inspection, Second Edition. KS 201:2010 Kenya Standard — Unified valve for liquefied petroleum gas cylinders — Specification, Second Edition. KS 2224:2010 Kenya Standard — Welded steel tanks for liquefied petroleum gas (LPG) — Road tankers — Design and manufacture, First Edition. Civil Engineering KS 2236:2010 Kenya Standard — Determination of Moisture content of timber (electric moisture meter method), First Edition. KS 1780-1:2010 Kenya Standard — Building lime Part 1: Definitions, specifications and conformity criteria, Second Edition. KS 1780-2:2010 Kenya Standard — Building lime — Part 2: Test methods, Second Edition. KS 1780-3:2010 Kenya Standard — Building lime — Part 3: Conformity evaluation, Second Edition. KS 18:2010 Kenya Standard — Steels for building and construction - Specification, Second Edition. Electrotechnical KS ISO IEC 7501-1:2008 Kenya Standard — Information Technology Identification cards- Machine readable travel documents — Part 1, Machine readable passport, First Edition. KS ISO IEC 7501-2:1997 Kenya Standard — Information Technology Identification cards — Machine readable travel documents — Part 2, Machine readable visa, First Edition. KS ISO IEC 7501-3:2005 Kenya Standard — Information technology identification cards — Machine readable travel documents — Part 3, Machine readable official travel documents, First Edition. KS ISO IEC 18013-1: 2005 Kenya Standard — Information technology – Personal identification — ISO compliant driving license — part 1: physical characteristics and basic data set, First Edition. KS ISO IEC 18013-2:2008 Kenya Standard — Information technology — Personal identification — ISO compliant driving license — Part 2: Machine-readable technologies, First Edition. KS ISO IEC 18013-3:2005 Kenya Standard — Information technology identification cards — Machine readable travel documents — Part 3, Machine readable official travel documents, First Edition. KS 2262:2010 Kenya Standard — Fluorescent lamps and other lamps containing mercury — Specifications and disposal requirements, First Edition. Service KS ISO 1121:2009 Kenya Standard — Recreational diving services –requirement for the introductory scuba experience programmes, First Edition. KS ISO 24801- 1:2007 Kenya Standard — Recreational diving services – Safety related minimum requirements for the training of recreational scuba divers Part 1: Level 1 – Supervised diver, First Edition. KS ISO 24801- 2:2007 Kenya Standard —Recreational diving services – Safety related minimum requirements for the training of recreational scuba divers Part 2: Level 2 – Autonomous diver, First Edition. KS ISO 24801- 3:2007 Kenya Standard — Recreational diving services – Safety related minimum requirements for the training of recreational scuba divers Part 3: Level 3 – Dive leader, First Edition. KS ISO 11107:2009 Kenya Standard — Recreational diving services – requirements for training programmes on enriched air nitrox (EAN) diving, First Edition. KS ISO 24802- 1:2007 Kenya Standard — Recreational diving services – Safety related minimum requirements for the training of scuba instructors Part 1: Level 1, First Edition. KS ISO 24802- 2:2007 Kenya Standard — Recreational diving services – Safety related minimum requirements for the training of scuba instructors Part 2: Level 2, First Edition. KS ISO 24803:2007 Kenya Standard — Recreational diving services – Requirements for recreational scuba diving service providers, First Edition. KS 2217-6: 2010: Kenya Standard — Glossary of terms used in the education sector – Part 6: University education, First Edition. KS 2235:2010 Kenya Standard — Handling of herbal medicine - Code of hygiene, First Edition. KS 2229:2010 Electronic records management systems — Functional requirements, First Edition. Confirmations The following standards were confirmed as Kenya Standards: KS 809-2:1999 Kenya Standard — Specification for toilet cleansers Part 2: Acidic liquid toilet cleansers. KS 809-3:1999 Kenya Standard — Specification for toilet cleansers Part 3: Alkaline and neutral liquid toilet cleansers. KS 815:1987 Kenya Standard — Specification for Portable Reflective Warning Triangles for motor vehicles (second edition). KS 653:1998 Kenya Standard — Household insecticidal aerosols - Specification (second edition). THE KENYA GAZETTE 4th February, 2011 The following standards are hereby withdrawn forthwith. KS 09-1501:1990 Spirit levels for use in precision engineering. KS 09-531:1983 Specification for system requirements for measurement and calibration systems. KS 09-534:1986 Code of practice on precision of test methods for the determination of repeatability and reproducibility by interlaboratory tests. KS 09-644:1985 Specification for class 0.5, 1 and 2 alternating — Current watt hour meters. KS 09-705:1986 Specification for surface roughness-parameters: their values and general rules for specifying requirements. KS 09-709:1986 Specification for cylindrical weights from 1 gram to 10 kilograms (medium accuracy class also called class M2). KS 09-710:1986 Specification for rectangular bar weight from 5 kilograms to 50 kilograms (medium accuracy class). KS 09-711:1985 Specification for weights of accuracy classes E1, E2, F1, F2, from 50 kg to 1 mg. KS 09-712:1986 Specification for standards weights for verification officers. KS 09-713:1986 Specification for metrological regulations for non-automatic weighing machines. KS 09-716:1986 Specification for voltage transformers. KS 09-725:1986 Specification for petroleum products-transparent and opaque liquids-determination of kinematic viscosity and calculation of dynamic viscosity. KS 09-726:1985 Specification for glass capillary kinematic viscometers — Specification and operating instructions. KS 09-727:1986 Specification for petroleum products — Calculation of viscosity index from kinematic viscosity. KS 09-728-1:1986 Specification for the general requirements for tensile testing machines — Part 1: General requirements. KS 09-729:1985 Specification for compression testing machines. KS 09-728-2:1986 Specification for the general requirements for tensile testing machines — Part 2: Large tensile testing machines. KS 09-728-3:1986 Specification for the general requirements for tensile testing machines — Part 3: Small tensile testing machines. KS 09-733:1985 Specification for liquid-in glass thermometers. KS 09-732-1:1986 Specification for tyre pressure gauges — Part 1: Indicating plunger portable type. KS 09-732-2:1986 Specification for tyre pressure gauges — Part 2: Dial portable type. KS 09-732-3:1985 Specification for tyre pressure gauges — Part 3: Inflation gauges for road vehicles. KS 09-734:1985 Specification for solid-stem general purpose thermometers. KS 09-735:1985 Specification for enclosed-scale general purpose thermometers (commercial quality for general use). KS 09-736:1985 Specification for solid-stem calorimeter thermometers. KS 09-737:1985 Specification for enclosed-scale calorimeter thermometers. KS 09-738:1985 Specification for long solid-stem thermometers for precision use. KS 09-739:1985 Specification for short solid-stem thermometers for precision use. KS 09-740:1985 Specification for long enclosed-scale thermometers for precision use. KS 09-741:1985 Specification for short enclosed-scale thermometers for precision use. KS 09-850:1987 Petroleum measurement tables—Part 1: Tables based on reference temperature of 15 °C and 60 °F. KS 09-851:1987 Method for measurement and calibration of upright cylindrical tanks. KS 09-852:1987 Standard method for measurement and calibration of horizontal tanks. KS 09-856:1987 Methods for liquid calibration of tanks KS 09-859:1987 Code of practice for the expression of uncertainty in measurement. Dated the 30th September, 2010. JOEL KIOKO, MR1221876 Secretary, National Standards Council.