GAZETTE NOTICE NO. 7615

PURSUANT to section 59 of the Environmental Management and Co-ordination Act CAP 387, the National Environment Management Authority (NEMA) has received an Environmental Impact Assessment Study Report for the above proposed project. The proponent, Ndovu Rock Limited, proposes to install a cement and cement product manufacturing plant comprising of limestone crushing units, kilns for calcination, raw material and finished product handling systems, storage silos, warehouses, cement grinding and processing units, packaging and dispatch facilities, internal access roads, water and power utility systems, administrative offices, associated facilities and amenities on plot L.R. No. Nyeri/Lusoi/213, Lusoi sub-location, Thegu river ward, Kieni sub-county, Nyeri County. The following are the anticipated impacts and proposed mitigation measures: Potential Impacts Mitigation Measures Air quality (dust emissions) • Regularly sprinkle water on exposed surfaces, access roads, and excavation areas to suppress dust • Cover trucks transporting soil, sand, and aggregates to prevent dust dispersion. • Restrict vehicle speeds (10Kp/h) within the construction site to reduce dust generation. • Provide temporary barriers or windbreaks around material storage areas • Ensure construction materials such as cement and sand are stored in covered areas. • Conduct regular maintenance of construction equipment to minimize emissions. Noise and vibration • Ensure construction machinery and equipment are maintained in good working condition and fitted with appropriate silencers. Potential Impacts Mitigation Measures • Limit construction activities to daytime working hours. • Provide workers exposed to high noise levels with appropriate PPE such as earplugs and earmuffs. • Install temporary noise barriers where construction occurs near sensitive receptors. • Inform nearby communities in advance about high-noise activities. Water pollution • Prevent discharge of contaminated water into nearby drainage systems. • Install temporary drainage channels to control stormwater runoff. • Provide sediment traps and silt fences to prevent soil erosion. • Designate specific areas for equipment washing and concrete mixing. • Ensure proper management of fuels, oils, and chemicals to prevent spills. Soil degradation and erosion • Limit vegetation clearing to areas strictly required for construction, • Implement erosion control measures such as silt fences and drainage channels, • Rehabilitate disturbed areas immediately after construction, • Stockpile excavated soil properly and stabilize it where necessary. Waste generation • Develop and implement a Construction Waste Management Plan, • Segregate waste into recyclable, reusable, and disposal categories as per the provision of EMCA (Waste Management) Regulation 2024. • Provide appropriate waste bins and store waste in designated containers before disposal. • Engage NEMA licensed waste handlers for transportation and disposal. • Prohibit open burning of construction waste. Occupational health and safety risks • Develop and implement an Occupational Health and Safety Plan in accordance with the Occupational Safety and Health Act (OSHA), 2007. • Provide PPE such as helmets, gloves, safety boots, dust masks, and reflective jackets. • Conduct safety induction and regular training for workers. • Install safety signage and warning notices across the site. • Maintain first aid kits and emergency response equipment. Traffic and access disruptions • Develop a traffic management plan for construction vehicles. • Schedule delivery of construction 22nd May, 2026 THE KENYA GAZETTE Potential Impacts Mitigation Measures materials during off-peak hours. • Ensure proper signage and traffic control around the construction site. • Maintain safe access roads for surrounding communities. Community Health and Safety Risks • Restrict unauthorized access to the construction site through fencing, Provide adequate lighting and security personnel, • Conduct community awareness programs regarding construction activities. • Maintain clear communication with local authorities and community representatives. Hazardous material handling risks • Maintain an up-to-date inventory of all chemicals stored on-site, including cement additives, fuels, lubricants, and cleaning agents. • Ensure all chemical containers are properly labelled with product name, hazard classification, and safety instructions. • Keep Safety Data Sheets (SDS) for all chemicals accessible to staff at all times. • Train all personnel on safe handling, storage, and use of chemicals, as well as emergency response procedures. • Minimize chemical movement within the plant to reduce the risk of spills or leaks; transport chemicals using appropriate handling equipment. • Provide spill kits, absorbents, and containment equipment at strategic locations across the plant. • Develop and implement a Chemical Management and Spill Response Plan to guide safe handling practices, emergency response, and compliance with environmental regulations. • Store chemicals in bunded, ventilated areas away from watercourses, drainage, and high- traffic zones. • Conduct periodic inspections of storage areas, containers, and handling procedures to identify potential risks and ensure compliance. Solid and hazardous waste generation • Develop and implement a comprehensive Waste Management Plan (WMP) covering all waste streams generated on-site, including concrete residues, packaging, and hazardous materials. • Provide designated, impervious washout areas for concrete trucks and equipment to prevent contamination of soil and stormwater. • Track and record all returned or excess concrete to ensure it is either reused in site works (e.g., paving, Potential Impacts Mitigation Measures curbing) or disposed of safely at licensed facilities. • Segregate waste streams into hazardous, non-hazardous, and recyclable categories to prevent contamination and facilitate proper disposal. • Store all waste in clearly labelled containers, ensuring they are closed when not in use and handled safely. • Engage licensed, NEMA-approved waste transporters for the collection, transportation, and disposal of regulated wastes. • Prohibit open burning, illegal dumping, or improper handling of waste materials onsite. • Provide training to staff on proper waste handling, segregation, and disposal procedures. • Conduct regular inspections of waste storage, handling practices, and disposal records to ensure compliance with environmental regulations. • Promote waste minimization and recycling wherever feasible to reduce the environmental footprint of plant operations. Occupational health and safety risks • Develop and implement a comprehensive Occupational Health and Safety (OSH) Policy in accordance with the Occupational Safety and Health Act (OSHA), 2007 and related subsidiary legislation. • Provide personal protective equipment (PPE) to all employees and contractors, including respirators, helmets, safety goggles, gloves, high- visibility clothing, and safety boots. • Install safety guards, emergency stop mechanisms, and protective barriers on all machinery, conveyors, mixers, and other high-risk equipment. • Conduct regular safety training, inductions, and emergency drills for all workers to cover hazard identification, safe work practices, and emergency response procedures. • Maintain first aid kits, fire extinguishers, and spill response equipment at strategic locations throughout the plant. • Develop, display, and communicate a comprehensive Emergency Response Plan (ERP) for incidents including fire, chemical spills, and injuries. • Appoint a Safety Officer to oversee implementation of OSH measures, ensure compliance with OSHA, 2007, and liaise with relevant authorities. • Conduct regular site inspections and safety audits to ensure compliance with safety procedures and identify potential risks. • Establish a reporting mechanism for near misses, accidents, and unsafe conditions to continuously improve 2584 2584 Potential Impacts Mitigation Measures safety management Pressure on Utilities (Water and Power) • Adopt water conservation measures including recycling of washout and process water. • Implement rainwater harvesting to supplement municipal supply. • Schedule high-water-demand activities (equipment cleaning, dust suppression, batching) during periods of stable water availability. • Install buffer storage tanks to maintain a reserve supply during peak demand or temporary interruptions. • Promote efficient water use practices among staff to minimize unnecessary consumption. • Monitor water consumption regularly to detect leaks, abnormal usage, or overdemand. • Explore reuse of treated process water for non-potable applications such as dust suppression and equipment washing. • Liaise with local authorities to ensure plant operations do not compromise water availability or pressure for neighboring communities. The full report of the proposed project is available for inspection during working hours at: (a) Principal Secretary, Ministry of Environment, Climate Change and Foresty, NHIF Building, 12th Floor, Ragati Road, Upper Hill, Upper Hill, P.O. Box 30126–00200, Nairobi. (b) Director-General, NEMA, Popo Road, off Mombasa Road, P.O. Box 67839–00200, Nairobi. (c) County Director of Environment, Nyeri County. A copy of the EIA report can be downloaded at www.nema.go.ke The National Environmental Management Authority, invites members of the public to submit oral or written comments within thirty (30) days from the date of publication of this notice to the Director- General, NEMA to assist the Authority in the decision making process for this project. Kindly quote ref. No. NEMA/ENVIS/SR/00528 Comments can also be e-mailed to dgnema@nema.go.ke MAMO B. MAMO, MR/8126959 Director-General.